FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
5006167-YTG-F-0517
TECHNICAL GUIDE
MODULAR PSC AIR HANDLERS
FOR USE WITH SPLIT-SYSTEM
COOLING & HEAT PUMPS
MODELS: MP SERIES
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at:
www.upgnet.com and www.york.com
Additional rating information can be found at:
www.ahridirectory.org
WARRANTY SUMMARY
Standard 5-year limited parts warranty.
Extended 10-year limited parts warranty
when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
®
®
DESCRIPTION
This unique modular system allows the flexibility to handle any
application. These versatile MP blowers may be used for
upflow, downflow, or horizontal left or right applications. They
may be combined with cased coils to function as a cooling only
unit or with a heat pump including electric heat for 1 and 3
phase applications.
FEATURES
COMMON MP AIR HANDLER AND MATCH-UP CM COIL
Rigid Case Construction -
An interior endoskeleton for
structural support, smooth sides, and locks in insulation.
Powder-painted -
G30 galvanized steel case provide a coated
edge that resists corrosion and rust creep.
Quality Construction -
Structural components
are made of
Aluminum or G90 galvanized steel to prevent corrosion.
Improved Insulation Design -
Single piece with no external
screws to reduce thermal transmission paths to prevent
sweating. Foil faced insulation for ease of cleaning.
Case Depth -
These models have 20.5” casing which provide
ease of attic access and tight applications.
MP AIR HANDLERS
Factory Sealed -
Achieves 2% or less total airflow leakage rate
at duct leakage test conditions in positive and negative
pressure for system airflow verification.
Electric Heat Kits -
6HK series of field installed electric heat
kits are available for installation-friendly and easy service
applications.
Blowers -
All models use direct-drive, multi-speed PSC motors.
CM COILS
MaxAlloy
TM
Coil -
Long life aluminum coils built to deliver
lasting performance, efficiency and reliability.
Thermostatic Expansion Valve -
The accessory chatleff style
TXV provides easy installation to convert the indoor coil to the
required refrigerant that does not require brazing to replace or
install. Some models are available with factory installed TXV.
Thermoset Drain Pan -
Low retention and positive slope for
drainage to reduce potential mold or contaminants.
Accessories -
A full line of matching accessories available for
use with the blower and coils to provide for any type of
application.
