SOLDERINGSTATION
ESD-SAFEANDTEMPERATURECONTROLLED
English
O P E R AT I O N
INSTRUCTION
04.07.03.177
I
. APPLICATION
1.
This unit is suitable for desoldering & soldering operations on a broad range
of components. E.g., SOIC, CHIP, QFP, PLCC, BGA, SMD, and more. The unit is
especially suited for desoldering operations on in-line sockets.
2. You can use this unit for heat shrinking, drying, paint removal, glue removal,
defrosting, pre-heating, glue soldering, and more.
SPECIFICATION
L305xW60xH60mm±5mm
0℃〜40℃/32℉〜104℉
100℃~480℃/212℉~896℉
Roots-typeblower
≤
120L/min
LEDNixieTubes
Controlunitdimensions
Operatingambienttemperature
Temperaturerange
Airflowtype
Airvolume
Display
I
I
.
PART LIST
Ⅲ.
OPERATION
1. Ensure the hot air gun’s stand is installed, and place the gun onto a workbench via the stand.
2. Install the required nozzle (Use of nozzles in larger diameters is recommended). Connect
the hot air gun's power cord to an electrical outlet.
3. Turn ON the power switch, and the display will show the set temperature. Press the tem-
perature adjustment buttons to set the required temperature. (Each press will change the
temperature value by 1°C, press and hold the button to change the value quickly). The
hot air gun will begin operating a few seconds after setting the temperature. Adjust the
air volume knob to set the gun to your desired volume. Begin operation when the tem-
perature stabilizes.
4. Once the operation is complete, turn OFF the power switch, and the hot air gun will then
enter cooling mode. Wait for the cooling process to be complete, and the blower motor
to stop operation before DISCONNECTING the power plug from the electrical socket.
This product should not be thrown in the garbage. In accordance with the European directive
2012/19/EU,electronicequipmentattheendoftheirlifemustbecollected&returnedtoanauthorized
recycling facility. Este producto no debe desecharse en la basura. De acuerdo a la directiva
europea 2012/19/EU, los equipos electrónicos al final de su vida se deberàn recoger y trasladar a una
planta de reciclaje autorizada.
Dieses Produkt sollte nicht mit dem Hausmüll entsorgt werden.
In Übereinstimmung mit der europäischen Richtlinie 2012/19/EU müssen elektronische Geräte am
Ende ihrer Lebensdauer eingesammelt und einem autorisierten Recyclingbetrieb zugeführt werden.
Made
in
China
Statement: The company reserves the right to improve
&
upgrade products,
product specifications and design are subject to change without notice.
Thank you for purchasing this product. Please read the manual
carefully before operating and keep this manual for future reference.
1
5
2
3
4
1. Stand
2. Temperature Adjustment Buttons
3. Temperature Display
4. Power Switch
5. Air Volume Adjustment Knob
