background image

IMPORTANT!
Please record the serial number of this
unit in the space below.

Model:
Serial No.:

The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.

WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:  TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing)  instructions in the
literature accompanying the
appliance.

• Explanation of Graphical Symbols

CAUTION

Natural Sound Stereo Receiver

5 Speaker Configuration

70W +70W (8

) RMS Output Power, 0.03% THD, 20–20,000 Hz (Front)

70W (8

) RMS Output Power, 0.08% THD, 1 kHz (Center) 

25W + 25W (8

) RMS Output Power, 0.3% THD, 1 kHz (Rear)

Digital Sound Field Processor; 4 Programs for Digital Sound Field Processing 

and 2 Programs for Dolby Surround (DOLBY PRO LOGIC and ENHANCED)

Automatic Input Balance Control for Dolby Surround

Test Tone Generator for Easier Speaker Output Balance Adjustment

3 Center Channel Modes (NORMAL/WIDE/PHANTOM)

40-Station Random Preset Tuning

Video Signal Input/Output Capability 

SLEEP Timer

Programmable Remote Control Transmitter

RX-V670

Thank you for selecting this YAMAHA stereo receiver.

OWNER’S MANUAL

CONTENTS

Safety Instructions ................................2
Supplied Accessories  ......................... 4
Profile of This Unit  .............................. 5
Speaker Setup for This Unit  ............... 6
Connections ........................................ 7
Adjustment Before 
Operation .......................................... 10
Operations ........................................ 13
Tuning Operations  ............................ 16
Using Digital Sound Field 
Processor (DSP) ............................... 18
Setting the SLEEP Timer .................. 22
Remote Control Transmitter  ............. 23
Notes about the Remote 
Control Transmitter ........................... 26
Troubleshooting ................................ 27
Specifications ................................... 28
Block Diagram  .................................. 29

Summary of Contents for RX-V670































Reviews: