background image

Active Servo

Technology

CC-70W is composed of RX-S70, CDC-S90, KXW-S70 and NX-S70.
CC-70S is composed of RX-S70, CDC-S90, KX-S90 and NX-S70.
* For U.K. and Europe models, NX-S70 is optional in some areas.

Natural Sound Mini Component System

CC-70W

/

CC-70S

OWNER’S MANUAL

Page

SAFETY INSTRUCTIONS.......................Inside Front Cover-1
INTRODUCTION....................................................................2
FEATURES ............................................................................2
SUPPLIED ACCESSORIES...................................................2
PRECAUTIONS ..................................................................2-3
NAMES OF CONTROLS, INDICATORS AND
REAR PANEL PARTS.........................................................4-6
REMOTE CONTROL TRANSMITTER ................................7-9
REMOVING THE FRONT GRILLE
(for Speaker System NX-S70 only).........................................9
PREPARATION FOR USE..............................................10-11
OPEN/CLOSE THE CONTROL DOOR................................12
TURNING THE POWER ON/OFF TO THIS SYSTEM .........12
SETTING THE CLOCK.........................................................13
SOUND CONTROL ..............................................................14

Page

COMPACT DISC PLAYER OPERATION........................14-21
TUNING OPERATION.....................................................22-24
TAPE DECK OPERATION 
(for KXW-S70 Double Cassette Deck) ............................25-28
TAPE DECK OPERATION 
(for KX-S90 Single Cassette Deck) .................................29-31
RECORDING COMPACT DISCS....................................32-37
OTHER RECORDINGS...................................................38-39
HOW TO USE THE BUILT-IN TIMER .............................40-43
USING EXTERNAL UNITS .............................................44-45
MAINTENANCE....................................................................45
SPECIFICATIONS................................................................46
TROUBLESHOOTING..........................................................47
ACTIVE SERVO TECHNOLOGY 
(for Speaker System NX-S70 only).......................................48

CONTENTS

IMPORTANT!
Please record the serial number of this unit in the
space below.

Model:
Serial No.:

The serial number is located on the rear of the
unit.
Retain this Owner’s Manual in a safe place for
future reference.

Summary of Contents for CC-70W




















































Reviews: