NVR Quick Start
1
WWW.XTSCORP.COM
1. Statement:
This manual supports XTS NVR models
NVR4BU36KIT / NVR409 / NVR416
As product update, the NVR functions might be different from the manual showing, please
follow the product that you purchased.
2. Safety Precautions
1) Do not use wet hands or any damp objects to touch the power switch and network digital
video recorder (NVR), in order to avoid electric shock.
2) After installing the host, it must be ensured that the host and the chassis have grounded to
avoid the video, audio signal being disturbed, and to avoid NVR being damaged by static
electricity.
3) The device does not include hard disk. Hard disk should be properly installed before use,
otherwise it can not perform the record and playback.
4) Host system supports format of the hard disk. If the hard disk has been used, please note
whether it is FAT32 format. The embedded network digital video recorder supports only
FAT32 format, otherwise there will be a hidden danger. Note: Please format hard disk when it
is the first time for you to use.
3. Hard Disk Installation
Prepare a screwdriver. We take the following equipment as an example, this NVR can have a hard
disk installed in the chassis, the largest capacity of which amounts to 4TB.
3.1
Hard Disk Installation Steps
1. Remove the fix screws on the side chassis 2. Connect the hard disk data wire and power
and open the top cover supply wire
3. Attach HDD on the bottom plate 4.Put back the cover and attach screws
