XTM Racing Rage Operating Instructions Manual Download

Page: 1 / 20

Page

Length: 250mm (9-7/8")

Height: 103mm (4")

Width: 198mm (7-7/8")

Weight: 810g (1.8lbs)

Wheelbase: 160mm (6-3/8")

Tyre Diameter: 67mm (2-5/8")

Ground Clearance: 29mm (1-1/8") with Suspension Extended

OPERATING INSTRUCTIONS

Rage 1/18th 4wd electRic off Road tRuck featuRes and specifications

Before operating your new Rage 1/18th 4WD Electric Off Road Truck, please
read and understand the warnings listed on the next page. Failure to do
so could lead to injury and/or property damage.

The Rage 1/18th 4WD Electric Off Road Truck is not intended for persons
under 14 years of age, unless closely supervised by an adult.

Version 1 October 2007

distRibuted in noRth

aMeRica by:

Global Hobby Distributors

18480 Bandilier Circle

Fountain Valley, CA 92708

distRibuted in

euRope by:

Ripmax Ltd.

241 Green Street

Enfield, EN3 7SJ, U.K.

Included NiMH Battery Pack and Charger

Solid-State Digital Electronic Speed Control

Dual-Arm Independent and Tunable Suspension

Ball-Bearing Drivetrain

Tough Double-Layer Chassis

Adjustable Heavy-Duty Suspension Links

Front Universal Joints

Factory-Built with Fully Proportional Radio Control System

Powerful Motor for Awesome Speed

8 Oil-Filled Adjustable Shocks Just Like Full-Size Race Trucks

Made in China

kit product # 145604 (us) / c-XtM-Rage (europe)

Summary of Contents for Rage





















Search results

Summary of Contents for Rage

Reviews:

Related manuals for Rage

Brands by name

Popular brands

XTM Racing Rage, Operating Instructions Manual

Search results

Summary of Contents for Rage

Reviews:

Related manuals for Rage

Brands by name

Popular brands