AD
N09-A
User Manual
EN
Button control
Warm notice
For any single earbud, when it is in standalone
mode, you can’t use it to play the previous song
or decrease the volume.
First time using
Product overview
Magnetic Contacts
Earbud Cap
Microphone
Choose the ear cap that suits you.
Charging Case Indicator Light
MFB Power Switch
MFB Power Switch
1x
2x
2x
1x
1x
3x
Accept
Decline
Reject
Previous
track
Next track
Volume-
Play / Pause
Voice assistant
iOS and part of the Android users can triple
click the left or right power switch to turn on
the voice assistant.
Siri and other Voice Assistant
3x
5.Turn on the Bluetooth function on your phone
and search for
【
N09-A
】
and connect it.
The voice assistant will be automatically activated
depends in different OS in mobile system.
demonstration
Error
1
2
3
4
5
6
7
8
9
Take-out from case
OR
press and hold for 5 seconds.
When back into case
OR
no connection for 5 minutes.
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
1.Tear off the insulating film.
2.Put the earbuds into the charging case to charge.
4.The indicator of one earbud will go off and
another will flash red and blue light
alternately
.
(In pairing mode)
Red
&Blue
Flash
3.Take out from case
,
the indicator will turn to Red
and Blue alternately.
Indicator off
Thanks for using our wireless electronic
products. For a good user experience, please
read the manual carefully before using the
products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by
yourself, and please use the standard charger to
charge.
Warm notice
△
If the left/right earbuds can't be paired or no sound,
pls turn off the Bluetooth of the mobile phone, when
the red/blue lights of the earbuds flash alternately,
tap any earbud for 3 times to re-pair. One earbud's
indicator turns off, aonther one's indicator flashes
red and blue alternately(in pairing mode)
△
If you want to switch the Bluetooth connection
to another device, please disable the Bluetooth
function in the previously connected device OR
delete the pairing name of "N09-A" from the
original device. Then the pairing name of "N09-A"
can be searched in new device and connected
successfully.
Warm notice
:
If the earbuds are not turned on
or there is no sound come out, please put them
back in the charging case again to make sure that
they are in the charging state before taking them
out for use.
Secondary Mic
Settings
Bluetooth
N09-A
Bluetooth
Now discoverable as
”
Qi iPhone
”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
www.xiwxi.com
