background image

Thank you for purchasing an Xbrand 360° 2.0 laptop stand with cooling fan. 
Please fill out the warranty registration online at www.xbrandproducts.com 

Features & how they function

Display height adjustment (Actuator Button): 

 Pressing the Actuator Button allows you to 

adjust the position of the Cooling Cradle and thereby your laptop’s display height to any one of 
four preset positions. 

To change positions perform the following steps:

1.  Clasp the corner of your laptop and the bottom of the Cooling Cradle so your laptop and the 

Cooling Cradle are firmly grasped between your thumb and fingers.

2. Press down on the Actuator Button (located on unit’s base) with your other hand.  

3. Push the Cooling Cradle forwards or backwards approximately 

1

/

2

” (1.2 cm) and release 

pressure on the Actuator Button. When you hear a “click”,  the Cooling Cradle has firmly locked 
into one of the four preset positions.

4. Release your clasp on the Cooling Cradle and your laptop once you are certain the Cooling 

Cradle has locked into position.

5. Repeat steps 1-4 to raise or lower system to next preset position.

Front drive access (Folding Retainer):

  The Folding Retainer located on the bottom of the 

Cooling Cradle allows you to gain quick access to drives, bays or buttons located on your 
laptop’s front edge.  

1. Lower the Cooling Cradle to its lowest position.  

2. Push the ‘slide switch’ (on front of Cooling Cradle) towards the right and, gently pull the 

retainer towards you. When finished, push the retainer back to its original position to lock it 
into place. Do not push on the retainer to adjust height of the Cooling Cradle.

360° rotation: 

 Non-skid rollers on the bottom of your unit allow 

it to rotate 360° to share your laptop’s display or access rear 
connections. 

Cooling Fan: 

 Its integrated cooling fan can enhance your 

computer’s speed and longevity.  11 blades and a sculpted, 
concave design combine to bathe your laptop in cool, ambient 
air while supporting proper system ventilation.  The on/off switch for the fan is located at the 
base of the unit on the left side.  

Integrated 4 Port USB 2.0 hub (USB hub equipped models only):

  A 4-port USB 2.0 Hub is 

built into your unit. All 4 ports are located at the rear of the unit. Use these ports to attach USB 
powered peripherals: external keyboards, mice, printers, scanners, hard drives, optical drives, etc. 

Placement of your 360° 2.0 laptop stand with cooling fan

Proper configuration of your workstation may help relieve back, shoulder and neck strain 
that often accompany long hours of working on a laptop computer. For a complete set of 
instructions on how to properly set up your workstation, see the US government’s CDC website: 
http://www.cdc.gov/od/ohs/Ergonomics/compergo.htm.

LCD screen:

  Adjust height so the top of your laptop’s display is at or just below eye level when 

you are properly seated in an upright position. Move the unit so that your laptop’s LCD screen is 
approximately 18”–30” (46–76 cm) from your eyes. 

Keyboard & mouse: 

 An external keyboard and mouse are highly recommended when using 

this product. Adjust keyboard height so your forearms are parallel to the floor (approx 90° angle 
at elbow). Adjust the slope of your keyboard so that the backs of your wrists are flat (in a neutral 
position), and not bent back while typing. Your mouse should be at the same height.

360° USB 2.0 Laptop Stand

with Cooling Fan

user’s guide

model:  XB-1002F

ONLY ACCESS FRONT EDGE DRIVES WHEN COOLING CRADLE IS 
IN ITS LOWEST POSITION.

DO NOT REMOVE HAND FROM CRADLE UNTIL YOU HEAR THE 
“CLICK”, INDICATING IT HAS LOCKED INTO POSITION.

fr

on

t dr

iv

e acc

ess

co

oling fan

displa

y heigh

t adjustmen

t

1.

2.

2.

18”–30” (46-76 cm)

plac

emen

t c

omf

or

t

3.

1.

brand

Reviews: