background image

Conceiver series

In case of any question, please contact your

X-Loupe

®

 distributor, or e-mail

[email protected]

MPG4_PLUS 

User Guide

Disclaimer

Thank you for using this product. While every effort has been made to 

ensure that the information contained in this guide is accurate and 
complete, no liability can be accepted for any errors or omissions.

We (Lumos Tech.) reserves the right to change the specifications 

described herein at anytime without prior notice.

No part of this guide may be reproduced, transmitted,transcribed, stored 

in a retrieval system, or translated into any language in any Lumos 
Technology Co., Ltd.

Trademark Acknowledgments

Canon

IXUS

IXY

PowerShot are either registered trademarks or 

trademarks of CANON Inc in Taiwan and/or other countries.

X-Loupe

®

 is a registered trademark of Lumos Technology Co., Ltd.  You 

are not authorized to use such trademark and service marks for any 
purpose unless you receive specific written permission from us (Lumos 
Tech.)  We reserve the trademark or other intellectual property rights.

MGP4E

122914

U

Summary of Contents for Conceiver series MPG4 PLUS


















Reviews: