X-GLOO XX0146, Manual

Page: 1 / 3

X GLOO ® . Windeckstr. 4 . 83250 Marquartstein . GERMANY
Tel: +49 (0) 86 41- 69 48 - 60 . xgloo.com . info@xgloo.com
IMPORTANT INFORMATION
• This user’s manual is intended to familiarize you with the operation
of the product. Keep this manual in a safe place for future
reference.
• The product is not a toy. Keep it out of the reach of children
and animals.
• Modifying or altering the product is prohibited!
• Never open the product by yourself. Never repair the product
yourself!
• Handle the product carefully. It can be damaged by shock, bumps,
or by falling from even modest heights.
• Keep the product away from extreme heat and direct sunlight.
• Never submerge the product in water or other liquids.
• Dimmer Box IP54 protected from low-pressure water jets
• Clean the LED light using a damp cloth and dry it well afterward.
Do not use aggressive cleaning agents.
• Store the LED light in a dry place.
• Subject to technical changes and modifi cations!
IMPORTANT INFORMATION FOR DISPOSAL: This electrical
appliance cannot be disposed of with household waste. For
proper disposal, please contact the public collection points
in your municipality. Details of the location of collection
points and of the possible quantity restrictions per day /
month / year can be acquired through the respective muni-
cipality.
SPECIFICATIONS (AT 100% LIGHT INTENSITY)
Light output: 1800 Lumen | Dimming: with dimmer (3)
Energy use: 18 Watt | Operating voltage: 42V
Power supply: 100-277V AC | LED: 18 Watt Protection Class
Circular connector: IP68 | Case dimmer box: IP54
Energy-effi ciency class: A | Light temprature: 4000K
LED light dimensions: 295x295x7 mm | WEEE-Nr.: DE28075200
Thank you for purchasing this LED Lighting Kit with
high-power LED light and included dimmer function.
Please read this user’s manual and follow all
instructions and tips regarding the proper use of your
new LED Lighting Kit.
CONTENTS OF DELIVERY
1x - LED light
1x - dimmer box including 230V power cable
1x - LED lighting mount
INSTALLATION AND USE
1. Close the connection (2) between the LED light (1) and the dimmer
box (3) (make sure that the connection is correctly and snugly
closed by turning the barrel around the connection clockwise).
2. It is easiest to install the LED Lighting Kit during the setup of your
Event Tent, just after infl ating
three of the four Tubes. Take the
long end of webbing on the LED
light and loop it over the tube
intersection (6). Connect it to the
buckle on the other side of the
LED light. Tighten the webbing
so the light is held snugly against
the Tubes.
3. Next, extend the four toggles
on the LED lighting mount and
connect them to the loops on the
inside of the Tubes of the Event
Tent (7).
4. Tuck the cable underneath the
Roof so that it follows one Tube
all the way to the ground (8). The
fourth Tube can now be infl ated.
5. The dimmer box (3) can be safely
stored on the ground.
Stepless adjustment of the LED
light brightness is possible with
the dimmer box (3).
Remove the LED Lighting Kit from
your Tent using the steps above in
reverse order. Ensure that the LED
light does not hit the ground when defl ating your Tent!
6
7
8
LED LIGHTING KIT | MANUAL
LED Panel (1), Connector (2), Dimmer box (3) Power plug (4)
2
1
3
4
1 1,5 m