Button
Long Press
(3 seconds or more)
Single Press
Power ON / OFF
Play / Pause
Bluetooth Enable (3 seconds)
Pairing(5 seconds)
Phone Pick up
MP3/FM (K230F)
EQ modes (K230C)
Adjustment of headlight
Headlight modes
Next track (while Playing)
Random mode (while Pause)
FM tuning (K230F)
Volume up
Back track (while Playing)
Resume (while Pause)
FM tuning (K230F)
Volume down
OFF
ON
Regular
Blinking
Slow
Blinking
Fast
Blinking
Blinking
(twice a
time)
Red
Light
System
off
*FM
playing
*FM
tuning
MP3
playing
Micro SD
unloaded
MP3
pause
Blue
Light
Bluetooth
off
BT.
on
BT.
playing
BT.
linked
BT.
pairing
BT.
Un-linked
A: Speaker
B: Micro SD & USB
C: Battery Cover
D: Microphone
E: Control Panel
F: Bicycle Mounting Ring
G: Head Light
Let the cover be parallel.
Push the battery cover
forward..
When the cover reached,
then push down.
1
WUSA K230 3 in 1 Bluetooth Cycling Kit
WUSA K230/K230F/K230C
Model index:
K230C - MP3 player
K230 - MP3 player & Bluetooth ready
K230F - MP3 player, Bluetooth ready & FM radio
Package includes:
WUSA K230 cycling kit
Micro USB cable
Ring Sponge
Docking
Bicycle Mounting Assembly
User Guide
Getting started
1.
Insert micro SD card and four AAA batteries and make
sure the batteries are installed properly according to the
illustration below. It is recommended to use rechargeable
batteries (ex: NiH, NiMn) for environmental protection
and better performance
2.
When putting on the battery cover, put the batteries into
the K230 till the battery cover has reached the mounting
gap on the bottom of the K230, then mount the tail gap of
K230
.
3.
To turn it ON, hold the start button at least 3 seconds till
hearing "WUSA". For turning OFF, hold the start button
for 3 seconds.
4.
K230 will turn OFF automatically when idle for 10 minutes
or in low power state.
Light Indication
Bluetooth setting (K230/K230F)
Turn ON K230 with micro SD card inserted. There are two
states in K230 Bluetooth settings - Pairing and Activate.
Once your Bluetooth device has paired with K230, it will link
with K230 automatically when Bluetooth function is enabled
at both sides.
Pairing
:
When conducting the initial pairing with Bluetooth
device, press for 5 seconds till the Blue light fast blink.
You will also hear a sound "DUDU" at the same time.
Activate the Bluetooth pairing mode on your Bluetooth
device (ex: iPhone, smart phone and computers).
When your Bluetooth device discovers K230, pair with K230
by pressing "K230" on your Bluetooth device. ( Enter "0000"
if required) The pairing is successfully when K230 is blinking
blue light slowly.
Activating
: After conducting the initial pairing, K230 will
automatically link with Bluetooth function enabled devices
which has been paired with K230. When K230 is On,
activate the Bluetooth mode by holding for
3 seconds.
To disconnect the K230 with Bluetooth device, hold
for
5 seconds, when the blue light goes OFF and made a beep
