WURM FVB120-PAT Manual Download

Page: 1 / 4

FVB120-PAT

Product information

FVB120-PAT_V3.30_PI_2018-01_EN Subject

to technical changes

Page 1 of 4

Front view

Field module for switching and monitoring 2 compressors

Features



4 relay switch outputs 230V~ for 2 compressors



230V~ inputs for operation feedback messages and detailed fault chain monitoring



Control of a screw compressor by ASV001 and HVI-G3/G4



Control of a reciprocating compressor by ASV101 and HVB-G3/G4, HVI-G3/G4, HVV-G3/G4



Emergency program in case of CAN bus errors



No parameters to be set on the device



Connection to master module via Wurm CAN field bus (F-BUS)

Summary of Contents for FVB120-PAT

Page 1: ...tch outputs 230V for 2 compressors 230V inputs for operation feedback messages and detailed fault chain monitoring Control of a screw compressor by ASV001 and HVI G3 G4 Control of a reciprocating comp...

Page 2: ...re Switch off the power to the entire plant when installing wiring or removing Otherwise a mains voltage and or external voltage may still be present even if the control voltage is switched off Always...

Page 3: ...alling Otherwise a mains voltage and or external voltage may still be present even if the control voltage is switched off Always remove both power plugs 230V and N 53 106 90 58 This device is designed...

Page 4: ...VBxxx PAT must not overlap In the event of an address collision an entry is made in the fault list of the master module and the LED fault on the field modules flashes Technical data Power supply 230V...