background image

WONDE PROUD TECHNOLOGY. 

 
Copyright © Wonde Proud Technology. 2007. All rights are reserved.                           of 

19 

2

 

General Notes

 

All materials contained on this documentation is protected by the copyright law and 

may not be reproduced, transmitting, published or broadcast without the prior obtaining 
authorization of Wonde Proud Technology. The documentation is provided for testing, 
evaluation, integration and product information purpose and it may contain deficiencies or 
inadequacies information of products. This product is not intended for use in life support 
appliance, devices or systems where a malfunction of the product can reasonably be 
expected to result personal injury. Wonde Proud or its supplier will not be liable for any 
consequential, direct, indirect, incidental, punitive or other damages including without 
limitation, damages for loss of business profits, business interruption, loss of business 
information or other pecuniary loss that arising out the use of or inability to use the 
documentation or product, even if Wonde Proud has been advised of the possibility of such 
damages. The customers using or reselling the product in such application do so at their 
own risk and agree to full indemnify Wonde Proud for any damages resulting from illegal 
use or resale. Subject to change without notice at any time. 

 
 

Copyright 

Reproduction, dissemination, edition of this document, or utilization of the content and 

communication format as well as giving to other without authorization are prohibited. 
Offenders will be held liable for payment of damages.    

 
 

Copyright ©Wonde Proud Technology 2007. All right are reserved.

Summary of Contents for WondeX SPT 100 Series



















Reviews: