User Manual
Venti
10 second protection
If you hold the button for more than 10 seconds, the output will shut off
automatically and the button light will blink 10 times.
Low voltage protection
If the battery voltage is lower than 3.3V, the button light flashes 40 times and
then the device will shut down. You can charge the device via USB cable to
Quick Start
Click the button 5 times continuously, it will turn the device on/off. To use, press
and hold the button down while you vape. Let go of the button when finish.
Liquid Fill Process
1.Unscrew the atomizer base off atomizer tube.
2.Slowly fill the liquid into the space surrounding the air pipe.
Note:
Please make sure you refill into the right place and do not over fill into the
air pipe.
Airflow Adjustment
Rotate the airflow control ring clockwise, the airflow hole will be exposed, the
more the hole is exposed, the larger the airflow.
Battery Performance
Short circuit protection
During usage: 1. The output will shut off automatically then the button light will
blink 3 times indicating the short circuit protection has occurred.
2. The device will shut down automatically and all the lights will
turn off. In this situation, please charge the battery to reactive
the device.
Before vaping: The button light will blink 5 times indicating the short circuit occurs.
Notice for Use
Thank you for choosing WISMEC products! Please read this manual carefully
before initial use. If you require additional information or have questions about
the product or its use, please consult your local agents, or visit our website at
www.wismec.com.
Product Introduction
The Venti, Italian for twenty, mimics the look of a 26650 Mod, hence its name:
Venti. It is constructed from stainless steel, making it strong and durable. It
has a 3000mAh power capacity and a 5.8ml liquid tank capacity to ensure
lasting usage. Users can also choose from two kinds of atomizer heads either
in 0.5ohm or 1.0ohm. Venti is truly remarkable for those seeking vapor
production, battery life, large liquid capacity, and prolong use.
Venti
Mouthpiece
Venti
Atomizer Tube
Venti
Atomizer Head
Venti
Atomizer Base
Venti Battery
unlock the low voltage protection mode.
Resistance detection
I
f the resistance of the atomizer is greater than 5 ohm, it is too high for device
to detect. When the button is pressed, the light will flash indicating there is no
atomizer.
If the resistance of the atomizer is less than 0.15ohm, the button light will
flash quickly 5 times.
