Quick Guide
Theorem
Atomizer
How to use:
1. The two terminals on the center post are the positive poles, and the negative
poles are on the both sides of center post.
2. The users can install the NotchCoil with Cotton included in the package or roll
the heating coil to their preference. Before rolling the coil, the users should
unscrew the screws on the positive and negative poles with the equipped
screwdriver. After completing rolling, screw the screws again and cut down the
spare coils.
Note:
While rolling the coil by users, the two slots on the atomizer base should
be filled with cotton for delivering liquid.
3. Put the glass tube into the atomizer base tightly.
Theorem Atomizer Overview
Mouthpiece
Top cap
Regulating
Component
Airflow
Control Ring
Glass Tube
Atomizer Base
Accessories:
4. Put the airflow control ring on the regulating component and then put the top
cap into the regulating component tightly.
Note:
While adjusting the airflow, you should loosen the top cap and regulate the
airflow control ring to the proper position. After adjusting, tighten the top cap
again.
5. Put the mouthpiece into the top cap and the whole top cap component is
assembled.
6. Drip some e-juice along the hole onto the atomizer base.
Note:
The cotton should be saturated with e-liquid before using.
7. After filling, put the top cap component into the glass tube tightly and the whole
atomizer is assembled.
+
+
-
-
Screwdriver
NotchCoil with Cotton
TM
Steel Tube
TM
