background image

TWO IN ONE 2000M-H FULL-HD 

WIRELESS VIDEO TRANSMISSION

MANUAL BOOK

© 2018 Wireless Prime INC. All Rights Reserved.

01

02

About the User Manual

This Manual details the product specifications, instructions for use, 
precautions, and troubleshooting. Read the Manual carefully before using 
the product. If you have any questions or difficulties in using this product, 
contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless 
transmission system. The 4 video channel transmission shares one wireless 
channel and supports the highest video resolution up to 1080P/60Hz. 
This system is based on 5G wireless network technology for transmission, 
along with advanced 4×4 MIMO and Beam-Forming technology. Image 
processing is performed using H.264 coding-decoding technology, 
and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD 
input and output, with the highest resolution of 1080P/60Hz. With the use of H.264 
coding-decoding technology with high compression ratio and high definition, 
the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has 
advantages over other WiFi products in the market in terms of transmission 
distance and image bitrate. Beam-Forming technology makes wireless signals 
more concentrated and stronger in the direction from which they are transmitted 
to the receiver, allowing them to transmit farther and be less susceptible to 
interference from other signals, thus making them more stable.

Packing List

 

The following items are included in the product package

Notice:  The transmitter comes with the Sony NP-F type battery dock and has 

preassembled V-mount connector. The receiver has preassembled V-mount battery 

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution 
up to 1080P60 per channel. 4 channel videos shares one wireless channel, 
which greatly saves spectrum resources and provides great convenience for 
users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard 
mode and RTSP streaming mode. In standard mode, this product supports 
4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI. 
In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX, 
and the video streaming interface is LAN port(RJ45) ..

Support

 

RS232/422

This

 

product

 

supports

 

 

signal

 

transmission

 

via

 

RS232

/

422 interface

which

 

is

 

convenient

 

for

 

users

 

to

 

control

 

the

 

transmitting

 

terminal

 

through

 

the

 

device

 

at

 

the

 

receiving

 

terminal

such

 

as

 

the

 

PTZ

.

controlling

Support monitoring on mobile devices 

This product supports monitoring on portable devices, like mobile phone, 
tablet and PC. User can install live streaming tool supporting RTSP like VLC 
on mobile device, and connect portable devices with receiver via WiFi to watch 
the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces

Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces

Power adapter *1 piece  Metal Stand *1 piece

Double screw the 

connector*4 pieces

Rs232 cable

*4 pieces

RS232 cable

*1 pieces

Summary of Contents for TWO IN ONE 2000M-H






























Reviews: