Manual Can Opener
Contents / parts list
Included with product
• Can Opener
(with Blade and Gear)
• Can Opener Base
• Installation Kit for
Wood Tables
• Installation Kit for
Stainless Steel Tables
Replacement Parts List
CO-1B: Replacement
Blade Set
CO-1BS: Blade Screw Set
CO-1G: Replacement Gear
CO-1WI: Installation Kit for
Wood Tables
CO-1SI: Installation Kit for
Stainless Steel
Tables
USE & CARE MANUAL
CO-1
WARRANTY INFO
Winco warrants these products to be free from defects in
material and workmanship for a period of one year from the
date of purchase. The Company’s obligation under this warranty
is limited to repairing or replacing without charge any part or
parts found to be defective under normal use. It is the sole
responsibility of the purchaser to return the entire unit to the
distributor, transportation charges prepaid.
This warranty does not cover parts that must be replaced under
normal use, including, but not limited to, blades and gears on can
openers. No other warranty, written or verbal, is authorized by the
Company. Warranty information outside the United States may
vary; please consult your distributor.
REPLACEMENT PARTS
Replacement parts are available for purchase. Please check our
website for up to date parts list and prices: www.wincous.com.
CLEANING INSTRUCTIONS
The can opener must be cleaned daily or after each extended use.
Regular maintenance will help prevent unwanted build-up and
harmful bacteria growth.
1.
Use a stainless cleaning brush to remove all the food and can
opening residue from the gear, the gear cavity, and the knife
blade.
2.
Wash the knife, gear, and any splash area on the opener using
warm soapy water. Do not allow components to soak.
3.
Thoroughly dry the knife, gear, and can opener using a dry cloth
or paper towel.
4.
Coat the knife and gear with light non-sticking vegetable oil to
prevent rusting when the can opener is not in use.
WINCO
www.wincous.com
OPERATING INSTRUCTIONS
Figure 1
Figure 3
Figure 6
Figure 5
Figure 2
Figure 4
1.
Make sure can opener handle is in the unlock position (Figure 1)
and slide it up enough to place a can underneath it on the metal
base. (Figure 2)
2.
Hold the can against the bar of the opener with a height distance
of 3" between the blade and the top of the can. (Figure 3)
3.
Grip the handle firmly and thrust down onto the can to puncture
it. (Figure 4)
4.
Lock the handle (Figure 5) and turn it clockwise. This will
automatically turn the can around. Use your free hand to guide
the can as it rotates. Continue turning the handle until the top of
the can is removed. (Figure 6)
5.
Raise the handle to unlock position and lift it up to slide the
opened can out. (Figure 1)
IMPORTANT NOTE: Knife of this opener may be reversed for double
wear but should not be reshaped.
Unock Position
Lock Position
3"
