background image

OWNER’S MANUAL

REGISTER YOUR NEW SAFE NOW TO RECEIVE OUR 

LIMITED WARRANTY

Easy Online Warranty Registration: winchestersafes.com/warranty

Thank you for choosing Defender

®

  by  Winchester  Safes  to  protect  what’s 

important to you. Your trust in us is not something we take lightly. If you have any 

questions or need help setting your safe up for the first time, we’re here to help. 

You can contact us directly at 877-9GUNSAFE between 7am-5pm CST 

Monday-Friday to talk to one of our skilled Customer Service team members.

PLEASE READ THIS MANUAL THOROUGHLY BEFORE ATTEMPTING TO SET UP YOUR NEW SAFE

IMPORTANT - PLEASE READ FIRST

THE INFORMATION PROVIDED IN THIS MANUAL IS IMPORTANT

AND MUST BE READ IN FULL AND FOLLOWED COMPLETELY FOR YOUR SAFETY.

by Winchester

®

 Safes

4801 Esco Drive Fort Worth, Texas 76140

877-9GUNSAFE | winchestersafes.com

Defender®, Stop The Threat®, Winchester

®

 and the Winchester

®

 Horse and Rider are 

registered trademarks of the Olin Corporation and are used with permission.

Unless otherwise noted, all trademarks in this catalog are subject to trademark rights of Winchester Safes.

©Copyright 2017 Winchester Safes. For more information please visit www.winchestersafes.com.

Winchester Safes reserves the right to change options, features and prices at any time.

 

D-RF-HS-9 OM V1 2017

Model: D-RF-HS-9

TESTED SECURITY

This is a California-approved firearms safety device that 

meets the requirements of California Penal Code Section 

12088 and the regulations issued thereunder. 

This product has also been tested and certified to confirm 

to ASTM F2456, Youth Resistant Firearms Container. 

This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, 

and (2) this device must accept any interference received, including interference 

that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Summary of Contents for DEFENDER D-RF-HS-9











Reviews: