USED IN THE JURY DELIBERATION OR SMALL MEETING ROOMS
Infrared Portable Assisted Listening System (IR PALS) Kit
The Americans with Disabilities Act (ADA) requires public facilities to provide equal access to people with
disabilities, including those who are hard-of-hearing. Portable, all-in-one ADA compliance kits from Williams Sound are
a convenient and economical solution for satisfying these requirements.
The
Williams Sound IR PALS KIT
provides everything you need to accommodate individuals for hearing accessibility
and/or language interpretation in a small group setting. This portable, easy-to-use infrared system is ideal for secure
applications. It operates at 2.3MHz/2.8MHz, at a range of up to 30 feet. This is Channels 1 and 2 on the provided black
Infrared Receivers (WIR RX22-4).
The William Sound IR-PALS Kit Includes
:
A)
Small Area IR System
(WIR-250) which
includes a
TV Talker Neckloop Receiver
(WIR
RX250), a
Transmitter/Battery Charger Unit
(WIR TX-250) with Power Supply, (2)
Rechargeable batteries
(BAT AP07D) and a
1m (Red/White) RCA Audio cable
B)
Neckloop Telecoil Coupler
(NKL 001)
C)
13’
Microphone Extension Cable
(WCA 007 WC)
D)
Conference microphone
(MIC 049), for use
in large conference settings
E)
Dual Bay Rechargeable AA Battery System
(BAT KT6) which includes a
Dual Bay Charger
(CHG 3502) with Power Supply and (4)
Rechargeable batteries
Do not use Rechargeable batteries.
F) 4 -
Black
SoundPlus
Infrared Receivers
(WIR RX22-4)
G)
ADA Wall Plaque
(IDP 008)
H)
Carry Hard Case
w/shoulder strap (CCS 030)
I) 4 -
Headphone Sets
(HED 026)
Caution
: Do
NOT
use rechargeable batteries (such as NiMH Rechargeable batteries) with the
SoundPlus IR
Receiver
units. The switch setting in the receiver or transmitter battery compartment should
already be set to “Alkaline” for non
-rechargeable batteries.
Note
: Remove
all
batteries from the
Infrared Receivers
and
Neckloop Receiver-TV Talker
units before
returning to the
IR PALS Kit
for storage.
To use
:
1.
Remove and setup the
TV Talker Neckloop Receiver
(WIR RX250) and
Transmitter/Battery Charger Unit
(WIR TX-250). Plug the
Power Supply
into the wall receptacle and the back of the TX-250. Set so the black
front of the Transmitter is pointed toward the IR Receiver wearer.
(If a media player is to be used connect the R/W Audio cable and Y-Adapter into the player)
2.
Use either the black
IR Receiver
from the courtroom or one from the IR PALS Kit.
Note
: Each of the
SoundPlus
IR Receivers
in the
IR PALS Kit
need to have two AA batteries installed.