![background image](http://html.mh-extra.com/html/wiley-x/worksight/worksight_quick-start-manual_981246001.webp)
WORKSIGHT
SIDE SHIELD REMOVAL AND ASSEMBLY
COPYRIGHT © 2015 WILEY X, INC. ALL RIGHTS RESERVED.
WILEY X, WX, BLACK OPS, logos, tag lines and product names are trademarks or registered trademarks (marcas
registradas) of Wiley X, Inc. in the U.S. and other countries. Logos © 2007-2015 Wiley X, Inc. All rights reserved.
To assemble the side shields into the frame, fully insert the side
shield “hooks” into the temple arm. Firmly grasp the temple arm
and grasp the side shield. Slide the shield toward the face frame
firmly until there is an internal snap to lock the side shield into
position. The side shield is not fully attached until it is snapped
(you will hear the click).
MAINTENANCE:
Wiley X lenses are specially coated to offer superior abrasion
resistance. Please follow below instructions to prolong the life of your lenses
and keep them performing at their best:
WARNING: Wiley X brand eyewear is tested tough. However, impact resistant
eyewear is not unbreakable and does not provide unlimited eye protection under all
circumstances and conditions. Misused, abused, scratched and/or damaged
eyewear can reduce impact protection (and void your limited warranty). Dirty
and/or wet eyewear can impair vision and reduce safety (resulting in personal
injury and/or property damage). Keep your Wiley X eyewear clean with water only.
Do not use solvents or abrasives as it could scratch or damage the product
reducing its effectiveness. Store your Wiley X eyewear in the protective case
provided to prolong the life of the lenses. Most of all, take all appropriate
precautions when wearing your Wiley X eyewear during hazardous and/or
dangerous activities and conditions. Wiley X, Inc. is not responsible for personal
injury, property damage or losses incurred while using Wiley X brand products.
Clean lenses with water only.
Do not use solvents or special cleaners.
Use micro-fiber cleaning cloth provided to gently wipe clean.
Never use paper products to clean and avoid wiping lens surface when dry
and/or dirty as this may potentially scratch the lens.
WSCARD REV1
7800 PATTERSON PASS ROAD, LIVERMORE CA 94550 USA
SØNDERGADE 8-10 7570 VEMB DENMARK