The Tarpon series is designed as a high performance
sit-on-top kayak tailored for the sport paddler. Our rudder
system is designed to fi t the original design profi le and is
able to stow securely and effi ciently on the deck when not
needed yet can be deployed very quickly when required.
The addition of a rudder to a kayak results in additional
control and effi ciency, especially in certain sea and wind
conditions. The presence of a rudder is by no means essential,
nor does it mean it must be deployed at all times. A rudder
is not a substitute or replacement for paddling experience or
talent.
CAUTION:
All possible steps have been taken to provide for a
successful instillation of your new rudder but installation does
require permanent alteration of your kayak. Please read all
instructions prior to beginning the process. Be safe, measure
twice before proceeding with any step requiring drilling or
cutting of your hull. If you are uncomfortable with any part
of this process, we suggest you contact your local dealer for
support and advice. It is possible they will undertake this
installation for you at a modest cost.
All directions included in these instructions reference
starboard (right), Port (left), forward, stern, etc., are given as if
you are standing behind your kayak looking forward.
Call our Customer Service Line: 1(800)390-0819 should
additional assistance be required.
I N S T R U C T I O N S
RUDDER KIT INSTRUCTIONS
TARPON 120/140/160/160i
A
ADDITIONAL TOOLS & MATERIALS NEEDED
Phillips Head Screwdriver
Cable Cutters
Drill with 5/32” & 5mm Drill Bit
11/32” Wrench
Cigarette Lighter
Small Tube of Lexel, or
(equivalent marine sealant)
Measuring Tape or Ruler
Crimpers
Deep 7/16” Socket
Rivet Gun
Scissors
Non-permanent marker
REVISION
1.0
4/20/05
DATE
