background image

 

P.O. Box 2827 

Eugene, OR 97402 USA

 

Production Code: 

 

 

 

 

 

VN 

06/20 

 

Model # 

1131GACh 

1131CAFh 

1131FSTh

 

McKenzie 8-Drawer 

Dresser 

GAC = Glazed Antique Cherry finish 

CAF = Caffè finish 

FST = Fieldstone finish 

Assembly Instructions 

 

IMPORTANT NOTES: 

 

For normal household use only. 

Not

 recommended for commercial use. 

 

Do not climb, sit or stand on this piece of furniture. 

 

Do not overload the drawers. 

 

Unload items before you move this unit. 

 

This assembly requires two people.

 

 

 

WARNING

 

Children have died from furniture tipover. To reduce the risk of 

furniture tipover: 

 

ALWAYS install tipover restraint provided. 

 

NEVER put a TV on this product. 

 

NEVER allow children to stand, climb or hang on drawers, 

doors or shelves. 

 

NEVER open more than one drawer at a time. 

 

DO NOT defeat or remove the drawer interlock system. 

 

Place heaviest items in the lowest drawers. 

Use of tipover restraints may only reduce, but not eliminate, 

the risk of tip over. 
Attention

: Attached to the bottom of or included with this unit is a tipping 

restraint kit. When you receive your furniture, be sure to find and install 

the tipping restraint as instructed in the kit. If you cannot locate the 

restraint, please contact us immediately for replacement. 

Drilling, sawing, sanding or machining wood products can expose you to 

wood dust, a substance known to the state of California to cause cancer. 

Avoid inhaling wood dust or use a dust mask or other safeguards for 

personal protection.

 

For more information go to: www.p65warnings.ca.gov/wood

 

This product can expose you to chemicals, including formaldehyde, 

which are known to the State of California to cause cancer.

 

For more information go to: www.p65warnings.ca.gov/furniture 

 

 

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

 

 CUSTOMER SERVICE

 

If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a 

replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you 

cannot order replacement parts through your dealer, please contact our customer service department. 

Hours:

 Our friendly customer service staff can be reached: 

Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time)

You may leave a message 24 hours a day, seven days a week. 

Customer Service: 

800-653-3336 • 

Outside the U.S.: 

541-687-0213 

 

Fax:

 541-687-2060• 

Email:

 [email protected]

 

 

Thank you for allowing us to help you furnish your 

home. We are certain you will be delighted with 

your new furniture for many years to come.

 

 

 

Summary of Contents for McKenzie 1131GACh









Reviews: