GENERAL INFORMATION
1. A qualified electrician, in accordance with IEE wiring regulations, should carry out
connection to mains wiring.
2. Ensure mains power is turned off during maintenance.
3. Ensure that the rated voltage and frequency requirements are compatible with the
available mains supply.
4. Cleaning of reflectors and lenses should be carried out using clean, soft and lint
free cloths and anti-static cleaning fluid.
5. Do not carry out high voltage insulation test, i.e. 500/1000v this may damage
internal components.
6. This product is class 2 insulated and so does not require an earth connection.
7. Some luminaires installed in outdoor environments may experience a build-up of
internal condensation. This is due to a difference in temperature between inside
and outside the luminaire which is quite common and acceptable under
BSEN60598.
8. Replacing the light source within this luminaire shall only be carried out by the
manufacturer, service agent or a similar qualified person.
Please note: All images shown are for illustration purposes and should be used
as a reference guide only
Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Tel44 (0)870 5 087 087 Facsimile: +44 (0)870 5 084 210
Registered No. 3848973 England
Registered Office:
As above
PKLEAFSIRCOCENT
TECHNICAL SUPPORT
Tel: 0161 331 5700
e-mail:
www.whitecroftlighting.com
Sirocco Central
Installation Leaflet
Jul 2016 - Rev C
SPECIFICATION
Lamp Type: LED
Lamp Colour: 4000°K
Control Gear: Fixed Output
Rating: IP66 / IK08
Weight: 14 Kg
SPECIFICATION
Body: Die cast aluminium
Diffuser: UV stabilised polycarbonate
Paint Finish: UV-stabilised coating
Power: 220-240V / 50-60Hz
Refer to website for latest lumen outputs / wattages
