background image

INSTALLATION INSTrucTIONS 

AND OwNer'S MANuAL

LOg SeT fOr uNVeNTeD 

gAS LOg HeATer 

Or

VeNTeD DecOrATIVe APPLIANce

MODeLS

LS18SrAO-1

LS24SrAO-1

LS30SrAO-1

wArNINg: If not installed, operated and maintained in ac-

cordance with the manufacturer's instructions, this product 

could expose you to substances in fuel or from fuel combus-

tion which can cause death or serious illness.

Log sets comply with ANSI Z21.11.2 unvented Heaters and 

also comply with ANSI Z21.60 Decorative Vented Appliances 

for Solid fuel Burning fireplaces. State or local codes may 

only allow operation of log sets in a vented configuration. 

check your state or local codes.

wArNINgS

–  Do not store or use gasoline or other flammable

 vapors 

and liquids in the vicinity of this or any other appliance.

wHAT TO DO If YOu SMeLL gAS

•  Do not try to light any appliance.

• 

Do not touch any electrical switch; do not use any phone 

in your building.

•  Immediately call your gas supplier from neighbor’s 

phone. follow the gas supplier’s instructions.

•  If you cannot reach your gas supplier, call the fire de

-

partment.

–  Installation and service must be performed by a qualified 

installer, service agency or the gas supplier.

If the information in this manual is not followed exactly, 

a fire or explosion may result causing property damage, 

personal injury or loss of life.

The 

White Mountain 

Log Collection

INSTALLer: 

Leave this manual with the appliance.

cONSuMer: 

retain this manual for future reference.

STACKED AGED OAK

GAS-FIRED

The Qr code below provides a link to our helpful 

“how-to” video. To get started, scan the code with 

your smart phone or tablet.

Page 1

Summary of Contents for LS18SRAO-1

























Reviews: