![background image](http://html1.mh-extra.com/html/whelen-engineering-company/super-led-fdct10br/super-led-fdct10br_installation-manual_969471001.webp)
Page 1
©2011 Whelen Engineering Company Inc.
Form No.14515 (071411)
Automotive:
Lightheads
Installation Guide:
Super-LED® Driving/Warning Light
Models FDCT10BR, FDCT10RR, FDCT10JR
2011 Chevrolet Tahoe
®
ENGINEERING COMPANY INC.
Internet:
www.whelen.com
Sales e-mail:
Canadian Sales e-mail:
Customer Service e-mail:
For warranty information regarding this product, visit
www.whelen.com/warranty
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
Installation / 2011 Tahoe:
1.
This installation can be done by going under the front bumper to
access the fog lights. If you have difficulty gaining access to the fog
lights this way, you may also remove the 3 christmas tree fasteners
and 2 screws toward the front of the wheel well that hold the wheel
shroud on and peel the shroud back.
2.
Unplug the existing fog light from the wiring harness, remove the
mounting hardware and remove the fog light from the vehicle. If the
vehicle is not equipped with fog lights remove the rubber plug from
this location. The plug is removed by pinching together the retaining
clips protruding from the back to disengage the plug allowing it to be
pushed out towards the front of the vehicle.
3.
Insert the LED Driving/Warning light into the hole the existing light
occupied.
4.
Mount the LED Driving/Warning light into the 2 slots the existing light
mounted to (Fig. 1). Secure the Driving/Warning light using the
supplied mounting hardware.
5.
Connect the wires to the Driving/Warning light wiring then replace
the fasteners and screws if you removed them in step 1.
Follow these wire designations to connect the lighthead wires:
WIRE.............................................................................................Function
LED Color
..........................................................
+VBAT for Warning Lights
WHITE
..................................................................
+VBAT
for Driving Lights
BLACK
.......................................................................................
Ground (-)
WHT/VIO
................................................................................. Scan-Lock™
©2011 Whelen Engineering Company Inc.
Form No.14515 (071411)
Automotive:
Lightheads
Installation Guide:
Super-LED® Driving/Warning Light
Models FDCT10BR, FDCT10RR, FDCT10JR
2011 Chevrolet Tahoe
®
ENGINEERING COMPANY INC.
Internet:
www.whelen.com
Sales e-mail:
Canadian Sales e-mail:
Customer Service e-mail:
For warranty information regarding this product, visit
www.whelen.com/warranty
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
Installation / 2011 Tahoe:
1.
This installation can be done by going under the front bumper to
access the fog lights. If you have difficulty gaining access to the fog
lights this way, you may also remove the 3 christmas tree fasteners
and 2 screws toward the front of the wheel well that hold the wheel
shroud on and peel the shroud back.
2.
Unplug the existing fog light from the wiring harness, remove the
mounting hardware and remove the fog light from the vehicle. If the
vehicle is not equipped with fog lights remove the rubber plug from
this location. The plug is removed by pinching together the retaining
clips protruding from the back to disengage the plug allowing it to be
pushed out towards the front of the vehicle.
3.
Insert the LED Driving/Warning light into the hole the existing light
occupied.
4.
Mount the LED Driving/Warning light into the 2 slots the existing light
mounted to (Fig. 1). Secure the Driving/Warning light using the
supplied mounting hardware.
5.
Connect the wires to the Driving/Warning light wiring then replace
the fasteners and screws if you removed them in step 1.
Follow these wire designations to connect the lighthead wires:
WIRE.............................................................................................Function
LED Color
..........................................................
+VBAT for Warning Lights
WHITE
..................................................................
+VBAT
for Driving Lights
BLACK
.......................................................................................
Ground (-)
WHT/VIO
................................................................................. Scan-Lock™