Assembly/Operating Instructions
StageTek
™
Guardrail
©Wenger Corporation 2013
Printed in USA 04/13
Part #281A442-03
Wenger Corporation,
555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448
Questions? Call.....USA: 800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com
Note:
Please read and understand the instructions before starting the assembly or installation.
Note:
If you need additional information, contact Wenger Corporation using the information below.
Visit the StageTek web page at www.wengercorp.com
for detailed instructions and videos.
Basic Instructions only!
For Replacement Parts and more detailed product information,
refer to the StageTek
™
Owner’s Manual 280A099.
A
SSEMBLY
W
ITHOUT
O
PTIONAL
I
NFILL
P
ANELS
To assemble the Guardrail without the optional Infill Panels, attach Rails to the top, middle and
bottom positions of both Upright Weldments using 3/8-16 x 3-3/4” Carriage Bolts, Tube Saddles
and 3/8-16 Acorn Nuts as shown.
Make sure anyone assembling
or installing the StageTek
component has read and
understands the instructions.
!
CAUTION
Always comply with Warnings
or Cautions in the instructions
or posted on the equipment.
!
CAUTION
Guardrails are recommended
for instances where the deck
height is 12” (30 cm) or more.
!
CAUTION
Tube
Saddle
Upright
Weldment
3/8-16
Acorn
Nut
3/8-16 x 3-3/4”
Carriage Bolt
Top
Rail
End Caps
may need to
be installed
in Rail Ends
Middle
Rail
Bottom
Rail
Tube Saddle
Orientation
