background image

WELLS BLOOMFIELD, LLC

10 Sunnen Dr., St. Louis, MO 63143

telephone: 888-356-5362

fax: 314-781-2714

www.wells-mfg.com

IMPORTANT:  DO NOT DISCARD THIS MANUAL 

This manual is considered to be part of the appliance and is to be given to the OWNER or 

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of 

this appliance.  Additional manuals are available from your WELLS DEALER. 

 

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR 

INSTALLING THIS APPLIANCE.

  Contact your WELLS DEALER if you have any 

questions concerning installation, operation or maintenance of this equipment. 

MODELS 

HDHP1230G 
HDSU1230G 
HDHP2430G 
HDSU2430G 
HDHP3630G 
HDSU3630G 

 

Includes 

INSTALLATION 

USE & CARE 

p/n 2M-

306627

 Rev. F   

 

 

 

 

 

   

 

 

 

 

 

    

 

 

 

    M226   

10

1109  

FOR YOUR SAFETY

 

Do not store gasoline or other flammable liquids 

in the vicinity of this or any other appliance. 

WARNING: 

Improper installation, adjustment, alteration, service or maintenance can cause 
property damage, injury or death.  Read the installation, operating and mainte-
nance instructions thoroughly before installing or servicing this equipment. 

IMPORTANT: 

The purchaser of this equipment must post in a prominent location instructions to be followed in the 
event the user smells gas.  This information shall be obtained by consulting the local gas supplier. 

Model HDHP3630G 

226 

OPERATION MANUAL 

HEAVY DUTY GAS HOTPLATE 

Summary of Contents for HDHP-1230G

































Reviews: