Weider CJXT3 User Manual Download

Page: 1 / 15

QUESTIONS?

As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that
there are missing or damaged
parts, we will guarantee you
complete satisfaction through
our Customer Service
Department.

Please CALL:
0345-089009

Or WRITE:
ICON Fitness Lifestyle Ltd
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire

Model No. WESY700921
Serial No.

Serial Number Decal

USER'S MANUAL

ORDERING REPLACEMENT PARTS

If you encounter any difficulties or problems with this product, contact the ICON Fitness Lifestyle Ltd. office, or
write:

ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire

Tel: Country Code: 0345-089009
Fax: 01789-440-798

To help us assist you, please be prepared to give the following information:

• The MODEL NUMBER of the product (WESY700921).

• The NAME of the product (WEIDER

CJXT3).

• The SERIAL NUMBER of the product (see the front cover of this manual).

• The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST/EXPLODED DRAWING

attached at the centre of this user’s manual).

CAUTION

Read all precautions and in-
structions in this manual before
using this equipment. Save this
manual for future reference.

Summary of Contents for CJXT3
















Search results

Summary of Contents for CJXT3

Reviews:

Related manuals for CJXT3

Brands by name

Popular brands

Weider CJXT3, User Manual

Search results

Summary of Contents for CJXT3

Reviews:

Related manuals for CJXT3

Brands by name

Popular brands