![background image](http://html1.mh-extra.com/html/wandh/proxeo-ultra-pb-530/proxeo-ultra-pb-530_additional-information_3074035001.webp)
Additional information
One control unit – two devices
Controlling Proxeo Ultra PB-530 and Proxeo Twist PL-40 with one foot control
Set power regulator to ‘OFF’
Connect the cable to the control unit
and foot control
>
1. LED flashes orange/red = not paired
Press function button for
5 seconds
>
Sequential white LED during pairing
>
1. LED flashes white = pairing successful
Disconnect the cable from the control unit
and foot control
Press ON/OFF button for
5 seconds
until the
LED flashes
green
>
LED flashes green = handpiece drive is in
pairing mode for 30 seconds
Use the stick to press the pairing button on the
foot control (underside) for
3 seconds
>
After 3 seconds the status LED switches from
flickering to flashing = pairing active
>
LED lights up green = pairing successful
>
LED flashes orange alternately =
pairing unsuccessful
Pairing C-NW foot control with PB-530 control unit
Pairing C-NW foot control with PL-40 handpiece drive
Page 1 of 2