background image

M001-W

WARNING

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a 

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may 

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.

Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect 

assembly or inappropriate use.

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

Single Monitor Desk Mount

75x75\100x100

VESA Plate

e (x1)

Swivel Arm

d (x1)

C-Clamp

b (x1)

C-Clamp Brace

c (x1)

Pole

a (x1)

Wire Clip

n2 (x2)

Wire Clip

n1 (x1)

Grommet Base Plate

m (x1)

M4 Spacer

s (x4)

M8x12 Bolt

g (x2)

Nut

h (x1)

M5x14 Bolt

f (x3)

Wrench

p (x1)

Allen Key 

o (x1)

M4x30 Bolt

r (x4)

M4x12 Bolt

q (x4)

M10 Bolt

i (x1)

Support Plate

j (x1)

M10 Washer

k (x1)

Spring Washer

l (x1)

INSTALLATION MANUAL

1-844-SATTLER (18447288537)

[email protected]

www.walielectric.com

(10kg/22lbs)

RATED

MAX 32”

TIPOVER WARNING

● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PA

RT OF MONITOR OR STAND.

● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.

Supplied Parts List

Option A : Clamp Installation

1. Connect Pole  a   and C-Clamp Brace  c  from the bottom using M5x14 Bolt  f  and 

tighten with Allen Key 3mm o  .

1

2. Select the preferred height according to your desk thickness. Connect C-Clamp  b  to C-Clamp 

Brace  c  using M8x12 Bolt      and tighten with Allen Key 5mm  o  . Rotate the hand knob 

clockwise to fasten for stability.

Hand Knob

a

c

c

c

f

o

o

o

g

g

b

b

a

c

f

o

o

a

m

f

Option B : Grommet Base Installation

1. Place Pole  a  onto Grommet Base Plate  m . Connect them from the bottom using M5x14 

Bolt and tighten with Allen Key 3mm     .

o

a

m

f

Reviews: