background image

Technical data sheet for

TARGET TOP GAS CONVECTION

OVEN RANGE

 900mm

RN8110GC

  Heavy-duty cast iron top with removable    

 centre 

ring

  Matched modular height machined top for    

  seamless work surface 

  High output dual ring cast iron burner
  GN 2/1 gas convection oven
  Drop down door
  Stainless steel exterior
 Easy clean
 Easy service
 Fully modular

Controls

• Large easy use control knobs - heat resistant reinforced
• Easy view control settings on knobs

Target top

• Variable high to low burner control
• Single control knob for burner and pilot system
• Flame failure pilot burner
• Manual pilot ignition for reliable operation

Oven

• 50-320

˚

C thermostatic control 

• Indicator lights for power and heating
• Piezo ignition to pilot burner
• Flame failure 
• Fan and burner automatic off when door open  

Cleaning and Servicing  

• Removable oven racking and sole plate
• Easy clean vitreous enamel oven and door inner
• Easy clean stainless steel exterior 
• Target Top fully serviceable from front of unit
• Bottom sill removable for burner and pilot access
• Door hinge spring adjustable on unit (door outer removed)
• Door disengages for lift off removal and increased service access
• Access to all parts from front of unit

Overall Construction

• Galvanized steel chassis
• Welded hob surround with 1.5mm 304 stainless steel bull nose 
• Splashback and hob sides 1.2mm 304 stainless steel
• Front panels and oven sides 0.9mm 304 stainless steel
• 150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel with  

 adjustable feet

Target top

• 3 piece heavy-duty cast iron top with fully machined surface
• Top plates and removable centre with integral spill protection design
• Cast top reinforced with integral heat fins for heat zone definition
• 45MJ dual ring cast iron burner with single control
• Full pilot and flame failure protection
• 50mm thick refractory brick lined burner box for high heat retention
• 2 vitreous enamelled spill trays 
• Supplied with heavy-duty centre casting removal tool

Oven

• Fully welded and vitreous enamelled oven liner
• GN 2/1 capacity with 4 position racking
• Heavy-duty easy remove heavy wire chrome rack supports
• Cast iron even heat oven sole plate 
• 30MJ oven burner
• Pilot and flame failure with piezo ignition
• 100W heavy duty motor  
• 200mm diameter heavy-duty circulation fan 
• Welded frame drop down door with heavy-duty spring hinge system
• 0.9mm 304 stainless steel door outer
• 1.0mm press formed vitreous enamelled door inner
• High density fibreglass insulated
• Stay cool stainless steel door handle with cast metal handle mounts
• Supplied with two chrome wire oven racks

Reviews: