background image

    Technical Support 

Subject 

PREDATAIR Error Codes and Symptoms 

 

Document 

Version 

Department 

Revision Details 

Revised by 

Tech 

Engineering 

Implemented 

EXT-PRED-016 

Tech 

Document Release 

SP 18 Aug 2015 

DB 18 Aug 2015 

N/A 

18 Aug 2015 

 

Page 

1

 of 

8

 

Knowledge Base

www.kb.vmacair.com

 

Email

[email protected] 

Web: 

www.vmacair.com

  

Technical Support: 

1(888)241-2289

  

Toll Free:

1(800)738-8622

  Fax: 1(877)740-3202 

 

System or Parts affected

  

 

 

PREDATAIR40 (H400001) 

 

PREDATAIR60 (H600002) 

 

PREDATAIR HHP60 (H600004) 

 

Index 

 

System or Parts affected ............................................................. 1

 

Overview ....................................................................................... 1

 

Retrieve stored error codes: ....................................................... 1

 

Display box messages ................................................................. 3

 

Power ON, System OFF ........................................................... 4

 

ON button pressed/Initial start-up ............................................. 4

 

Running ..................................................................................... 4

 

General ..................................................................................... 5

 

Temperature Sensor Trouble Shooting ..................................... 7

 

Temporarily override the compressor temperature sensor: ...... 7

 

Temporarily override the hydraulic temperature sensor: .......... 7

 

Electrical Schematic .................................................................... 8

 

 

Overview

   

 

General error codes, symptoms and trouble shooting. 

 

Retrieve stored error codes 

 

 

Enter DIAGNOSTIC mode: at the display box push and hold OFF button for 5 sec. The display 
will show DIAGNOSTICS, release the OFF button.  

 

The system will slowly scroll through menu headings. When the heading ERROR LOG is 
displayed, press and hold the ON button. When it enters this selection, release the ON button. 
While in the error log you can scroll through data by using the ON and OFF buttons.  

 

Record error codes in box below  

 

Once you have recorded the stored errors, press and hold both ON and OFF buttons at the same 
time to exit Diagnostics mode.  

 
A video showing 

how to access the PREDATAIR Diagnostics

 can be found here: 

https://www.youtube.com/watch?v=72TqKU_mngk

  

 
   

 
 

 

 
 
 
 

 

Summary of Contents for AIR INNOVATED H400001









Reviews: