LIST OF ITEMS:
Lift for plasma TV;
LCD/TV bracket;
LCD/TV mounting kit;
Installation manual
1.
PREPARATIONS FOR MOUNTING:
a. The CP-lift can only be opened in the "Locking Plate" position!
b.
Opening
the CP-lift
in a different position than "Locking Plate" down
, may
cause
serious damage
to the device !!!
c. Unscrew the lid of the box – 1
d. Unscrew the sides of the box – 2
e. Place the CP-lift with "Locking Plate" down so that the CP-lift can be opened - Minimum 140 cm from the Ground
f. Connect the lift to the power supply (230-240V 50Hz) Neutral - Blue / Power-Brown / Ground-Yellow: Green / and open
the lift to 70% of full opening, by connecting WHITE + RED control cables in POTENTIAL FREE CONTROL wire . Use the
diagram - electrical connection.
g. Take off the "Locking Plate" and remove the transport protection and the "White Masking Plate" masking plate.
h. After removing components needed to next steps of installation, close the CP-lift, by connecting WHITE + BLUE control
cables in POTENTIAL FREE CONTROL wire.
9. Unplug CP-lift wires from supply.
2.
INSTALLATION and ADJUSTMENTS:
2A.
a. Determine the location for mounting the CP-LIFT lift and drill 4 holes in the ceiling. Use a proper dowels
and
screws for the installation surface is the responsibility of the installation team).
b. Insert bolts into dowels through the lift's slotted openings (A) and tighten them securely, Checking proper (axis
X,Y ) leveling when installing the lift to a ceiling.
CP-LIFT
Ceiling lift models:
CP-LIFT - M
CP-LIFT - L
A
1/6
