VXO8358CI
INSTALLATION GUIDE
PAGE 1 of 7
U.S. Design Patent No. D937,344 S
BEFORE BEGINNING YOUR INSTALLATION
Read through the instruction guide before getting started with the installation. Professional installation is recommended for
this product.
CONTENTS
Octo Trumpet Train Air Horn (Chrome Color)
200 PSI Air Compressor
5 Gallon Air Tank
12V Electric Air Valve (Solenoid)
240 PSI Pressure Gauge
170-200 PSI Pressure Switch
250 PSI Safety Valve
1/4" NPT Wing Style Drain Valve
1/4" NPT Compression Fitting for 1/4" OD Air Line
1/4" NPT Compression Fitting for 3/8" OD Air Line
1/4" NPT Hex Head Male Plug
1/2" NPT Hex Head Male Plug x 2
3/8" OD Nylon Plastic Hose (25 Feet)
12mm Thread Sealant Tape (16 Feet)
30A In-line Fuse with Waterproof Holder
Remote Mount Air Filter
Horn Button
Mounting Hardware
Tire Inflation Gun with Gauge and 12″ Hose
35 FT Coil Hose with Quick Connect Stud and
Coupler
Blow Gun
1/4" NPT Male Quick Connect Coupler
Blow Gun Tip
Tapered Inflation Nozzle
Safety Blow Gun Tip
Inflation Needle
Quick Connect Stud x 2
Tire Inflation Kit’s Carry Bag
SAFETY INSTRUCTIONS
Do not attempt to disassemble, repair or customize this product.
Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water.
Avoid reaching out to touch or pick up any fallen or water submerged parts.
Never leave this product unattended during use.
Intended for use by adults only.
During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot
during such periods.
The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC
power source of 12 volts. Never operate this inflation kit at any pressure exceeding the 200 PSI. Do not inflate
any tire or other inflatable past its rated pressure.
