background image

Thank you for your VivaActive purchase. These products are designed for many years of enjoyment. Visit www.viva-active.com for 

the complete lineup of VivaActive products.

VivaActive® is a registered Trademark of the goba Sports Group, Inc. in the USA, Canada and other countries. 

Imported and distributed under license by: R.M.P. Athletic Locker Ltd. 151 Whitehall Drive, 201 Markham Ontario L3R 9T1 

Customer Service: http://www.viva-active.com

WARNING: 

Ages 3+. Choking hazard: contains small parts. Keep away from small children. Assembly and use should always be 

under adult supervision. This product is warranted for 30 days against manufacturer defects. Please retain retail receipt for date and 

purchase location verification. The product is not warranted against misuse, incorrect assembly or normal wear. The manufacturer, 

at its sole discretion, reserves the right to replace the entire unit or defective parts only within the warranty period.

PARTS LIST: 

1 Double Platform Swing, 4 Foam Covered Tube Frame Pieces, 2 Ropes, Hardware, 4 Bolts, 4 Nuts,  8 Washers, 1 Wrench

DIAGRAM 1: PLATFORM YARD SWING ASSEMBLY

Double Platform Swing

VASW002

A.

  B.

C.

D.

E.

F.

G.

ASSEMBLY:

Remove the parts from the packaging and check that they are 

complete. Check that each rope harness is correctly assembled 

as shown in the parts list.

Place the swing platform on the ground. Insert the foam-cov-

ered tube frame pieces into each of the four side loops.

Connect the six tube frame pieces together. Ensure that one 

narrow end and one wide end is put together in each case. 

Close all four cover strips. Use the screws, washers and nuts on 

the end of each of each rope harness to screw the frame 

together.

HANGING THE SWING AND ROPE ADJUSTMENT:

Please note that this swing is designed to be used and hung from 

an existing swing set in place of a conventional swing with 

sufficiently strong swing hooks and a nylon bearing. This swing 

does not include mounting hardware for any other type of 

installation.

Hang the swing frame using the retaining rings (see Diagram 1). 

Additional mounting hardware may be required for alternate 

installations. Hanging points must be at least as far apart as the 

swing seat is wide plus an additional 4” (10cm). The swing has 

two ropes and adjustment loops so that the height of the swing 

can be adjusted to fit any suitable hanging device. The swing 

ropes can be lengthened or shortened by pushing or pulling it 

through the adjustment loops. No one should sit on the swing 

while making adjustments. When making adjustments, ensure 

that the ropes remain the same length on both sides. Differing 

rope lengths will cause undesirable circular pendulum motion of 

the swing. If in doubt, perform a few gentle swings.

WARNING: 

Please retain this information for future reference.

Supports total weight of up to 100 kg (220 lb).

Only use under direct supervision of an adult! This product 

must be used with caution, to avoid falls or collisions causing 

injury to the user or third parties. Before use, check all parts 

for proper fit and ensure that all locking devices are secure.

Only suitable for private, domestic use. The owners of the 

swing, as well as competent supervisory personnel, are 

responsible for ensuring that all users enjoy this product in a 

safe manner.

Do not make any modifications to this product. Adjustments 

must only be carried out according to these instructions.

Keep others a safe distance away from the swing when in use. 

Never stand or kneel on the swing. Always hold firmly with 

both hands.

No objects of any kind must be in the vicinity of swing area 

(trees, walls, fences, clothes lines, etc.). Make sure that the 

ground is level, shock absorbing, and without any sharp 

edges, pointed objects, obstacles, inclines, differing levels, 

steps or hard surfaces. Rake surface periodically to prevent 

compaction and maintain appropriate depths.

Make sure that you have a safety clearance, in front and back, 

of at least 80” (2m) beyond the maximum reach of swing. 

Clearance between the swing and stationary components, 

such as swing scaffolding, must be at least 16” (40 cm) on 

each side. The swing must be least 16” (40 cm) but no higher 

than 99” (2.5 m) measured from the ground. Other swinging 

components, such as a neighbouring swing, must be placed 

at a distance of at least 24” (60 cm) away, measured while at 

rest.

Constant exposure to UV in sunlight can lead to fading of the 

colour, but will not affect performance or safety of the swing. 

The swing should be dismantled and stored indoors if not 

used for an extended period of time.

Enjoy being outside and active!

VASW002.m.01

RETAINING 

RINGS

ADJUSTMENT

LOOPS

Reviews: