![background image](http://html.mh-extra.com/html/vision/t9600hrt/t9600hrt_calibration-manual_1031439001.webp)
CALIBRA
TION GUIDES
1
Date of last revision: 12.05
TREADMILL.CALIB.REV4
CONFIRM CONFIGURATION
STEP 1
ENTER ENGINEERING MODE
• With the SAFETY KEY in place, hold the
“ELEVATION UP”
and
“SPEED
DOWN”
buttons for 5 seconds. The profile window will read
““DDGGAA33JJ””
and
the function window will read
““NNOONNEE””
.
• You are now in ENGINEERING MODE.
STEP 2
CHECKING CONFIGURATION
• Press the
“ELEVATION UP”
button until
““EENNGG11””
appears in the function
window. Press
“SELECT”
. The function window will read
““224400CC””
or
““IICC0000””
.
““55..66””
or
““55..99””
will appear in the elevation window and
““1100””
will appear in
the speed window.
• To change configurations, press the
“SPEED UP”
or
“SPEED DOWN”
button.
• Press the
“SELECT”
button to update data.
AUTO-CALIBRATION
STEP 3
ENTER ENGINEERING MODE
•
“ELEVATION UP”
to
““PP1144””
. The elevation window will read
““EENNGG””
and the
speed window will read
““OOUUTT””
. Press the
“STOP”
button. The function
window will read
““EENNGG11””
.
STEP 4
ENTER AUTO-CALIBRATIONS
• Press the
“ELEVATION UP”
or
“SPEED UP”
to
““EENNGG44””
.
• Press
“SELECT”
.
STEP 5
• Press
“START”
. The treadmill will calibrate itself. This will take about 3 to
5 minutes. When AUTO is complete,
““EENNDD””
will appear in the window.
Wait 10 to 15 seconds and the treadmill will reset itself to
““PP11””
.
STEP 6
• Press
“START”
to test the treadmill.
T9600HRT and T9600HRT Comfort v5.6, v.5.9
Calibration Guide
ILLUSTRATIONS FOR DISPLAY PURPOSES ONLY