7250R Remote Control
Quick Reference Guide
Congratulations on the purchase of your Viper
Home Security Accessory. This guide walks you
through the process of adding this accessory to your
system.
Note
: Make sure you already have a Viper Home
Starter kit or Viper Home Hub installed. Please refer
to the quick reference guides found in these sys-
tems, or visit:
www.viper.com/home/support
.
1. Log into your Viper Home account at:
home.viper.com
2. To pair the remote control to your system:
Click on the “Devices” tab
Click “Add New Device”
Click “Add Key Fob”
3. You need to assign an account user to this
remote. Click the “Browse” button and select
the desired user for the remote control.
4. You are then prompted to insert the batter-
ies provided within three minutes. Using a
coin, remove battery cover on the back of the
remote control, and install the CR2450 battery
provided.
