background image

Installation guide VinoSafe VSP

/ 460vspsav1ev8 /

  Page 1 out of 20 

 

 

 

NVS S.A.S. - VinoSafe 

2 Rue des Artisans 

F-68280 SUNDHOFFEN 

Tel.  + 33 (0)3 89 71 45 35 

Fax. + 33 (0)3 89 71 49 73 

Email: [email protected] 

www.vinosafe.com

 

Reference: 

460vspsav1ev8 

 

Last update : 

01/07/08 

 

 

INSTALLATION & RECOMMENDATION GUIDE 

VSP WINE CELLAR 

 

 

PLEASE  READ  THESE  INSTRUCTIONS  BEFORE  ASSEMBLING  AND  COMMISSIONING  YOUR                   

WINE CELLAR. THEY INCLUDE NECESSARY INFORMATION FOR YOUR SAFETY, THE APPROPRIATE USE 
AND MAINTENANCE OF YOUR CABINET. 
 

WAIT FOR 48 HOURS BEFORE TURNING THE CABINET ON 

 
 

A. THANKS… 

 
The VinoSafe team thanks you for choosing a VSP wine cellar. We design and manufacture them in the French region 

of Alsace in the same spirit as a wine grower who constantly tries to improve her/his wines quality. We hope you will 
be  fully  satisfied.  It  is  therefore  mandatory  for  you  to  take  some  time  to  read  this  guide  simultaneously  with  the 

discovery of your cabinet look and features. Your wines deserve this as you invest time and money into them. 
 
We thank you in advance to share with us all relevant remarks that will help us to improve our products and services. 

 
 

B. ROLE OF YOUR VINOSAFE RESELLER 

 
You will find  hereunder the name and address of the company with whom you concluded this purchase. Your local 

contact is the one who knows you best and who will be able to answer your first questions. 
 

With  15  years  experience  in  the  wine  cellar  business,  we  have  found  out  that  2  problems  out  of  3  can  be  solved 
without any intervention of VinoSafe to replace some parts. This is why you will find in this guide a lot of explanations 
and a list of questions and recommendations if you encounter a problem. If you do not solve the issue, please call you 

reseller and call VinoSafe in case you are not getting the appropriate replies. 
 

Don’t  forget  that  a  satisfied  customer  will  always  be  a  potential  for  positive  recommendations  to  neighbours  and 
friends. It is VinoSafe’s interest to make sure you are not left without the appropriate support! 
 

Your local reseller

 

 
 

 
 
 

 
 

 
 
 









Summary of Contents for VSP WINE CELLAR





















Reviews: