STORED PRESSURE, HAND PORTABLE
WET CHEMICAL(RESTAURANT KITCHEN) FIRE EXTINGUISHERS
MODELS: WC6L , WC2.5GAL
Owner’s SERVICE MANUAL
NO.ZX-UL-SM002
INSTALLATION, OPERATING & SERVICING INSTRUCTIONS
All fire extinguishers should be installed, inspected and maintained in accordance with the
National Fire Protection Association standard titled "Portable Fire Extinguishers", NFPA-10 and
the requirements of local authorities having jurisdiction.
When install, inspection, maintenance is required, it should be performed by trained persons
having proper equipment. Fire extinguishers are pressure vessels and must be treated with
respect and handled with care. They are mechanical devices and require periodic maintenance to
be sure that they are ready to operate properly and safely.
Victory strongly recommends that the maintenance of portable fire extinguishers be done by a
trained professional – your local authorized Victory Distributor.
Victory Corporation makes original factory parts available to insure proper maintenance – USE
OF SUBSTITUTE PARTS RELEASES VICTORY OF ITS WARRANTY OBLIGATIONS.
Victory parts have machined surfaces and threads that are manufactured to exacting tolerances.
O-rings, hoses, nozzles, and all metal parts meet precise specifications and are subjected to
multiple in-house inspections and tests for acceptability. DO NOT SUBSTITUTE.
Marine approval is valid only when the extinguisher is equipped with an approved marine
type bracket.
RECHARGE FIRE EXTINGUISHERS IMMEDIATELY AFTER ANY USE
REFERENCES IN THIS MANUAL: AVAILABLE FROM:
NFPA-10 Portable Fire Extinguishers National Fire Protection Association
1 Batterymarch Park, P.O, Box 9101
Quincy, MA 02269-9101
CGA C-1 Methods for Hydrostatic Testing of Compressed Gas Association, Inc.
Compressed Gas Cylinders 4221 Walney Road, 5th Floor
CGA C-6 Standard for Visual Inspection of Chantilly, VA 20151-2923
Compressed Gas Cylinders
Victory Fire & Gas Inc.
1713 Lewis Street
Bay City, MI 48706
Office - 989.322.0856