background image

1

用レンズ

梱包内容 / Packing items

レンズ 

(GL-M2910)

レンズキャップ(前)

レンズキャップ(後)

レンズカバー

 Lens 

(GL-M2910G)

Lens Cap (front side)

Lens Cap (rear side)

Lens cover

Installation Manual

GL-M2910
お買い上げいただき、ありがとうございます。

● この商品は業務用として特別に設計されたものです。専門知識

を持ったかたが取り付けおよび操作を行ってください。

● ご使用の前にこの「取付説明書」をよくお読みのうえ、正しく

お使いください。そのあとも必要なときにお読みください。

● 製造番号は品質管理上重要なものです。お買い上げの際は本機

側面の製造番号が正しく記されているかお確かめください。

● 本書についてのご注意

(1) 本書の内容を無断で転載して使用することは固くお断り

いたします。

(2) 本機の内容または本機の仕様および外観は予告なく変更

することがあります。

(3) 本書で使用しているイラストと本体の形状が若干異なる

場合があります。

GL-M2910G

Thank you for purchasing this product.

This product is designed specially for professional use. It  should
only be installed and operated by persons who possess the
required expertise.

Before using your new purchase, please read this Installation
Manual thoroughly. And, after reading, be sure to retain this
Installation Manual in a safe place for future reference.

The product number is important for quality control. Make sure
that the product number is inscribed on the side of the product at
the time of the purchase.

Regarding this Installation Manual
1. Reproduction of the contents of this manual without prior

permission is forbidden.

2. The information in this manual, the specifications and the

external view of the product are subject to change without
notice.

3. The illustrations used in this manual may differ slightly from

the actual appearance of the product.

準備する工具 / Tools to be prepared

プラスドライバー

六角レンチ

*1

 Philips Screwdriver

Hex Wrench

*1

*1 : 

六角レンチはプロジェクター

本体に付属しているものを
ご使用ください。

*1: Use the hex wrench supplied

with the projector.

LENS FOR

PROJECTOR

プロジェクションレンズ

GL-M2910

Projection Lens

GL-M2910G

GL-M2910/G̲f.pm6

02.8.6, 2:15 PM

1

Summary of Contents for Gl-M2910









Reviews: