![background image](http://html1.mh-extra.com/html/vicon/surveyor4-series/surveyor4-series_instruction-manual_1012692001.webp)
ADDENDUM
NOTES NO.
REV.
SEC.
TO INSTRUCTION MANUAL
Refer to
AA028-01-00 1003 1
XX028-05-00
S4 Series Fixed-Position Camera Domes
This addendum supplements instructions found in instruction manual XX028-06-00 for the Surveyor4 Series of
Miniature Fixed-Position Camera Domes. It pertains exclusively to Model S4VF-DN (product code 8328-04/
8328-03).
This addendum lists exceptions to instructions manual XX028-06-00 for correct installation of the S4VF-DN.
•
The unit does not require an isolated power supply (page 5). The camera/lens is one unit and the camera
includes an isolated power supply.
•
The camera mounting bracket is attached to the pan bracket. To adjust tilt, loosen the nut on the side of
the pan bracket and move to desired position (page 7).
•
The unit is delivered with a cable assembly connected to the interface PC board, one for power and one
for video (page 4-5).
•
There is a potentiometer (VR1 on the back board of the camera) for phase adjustment for line lock. It is
not on the enclosure (page 8).
•
There is a potentiometer (VR1 on the front board of the camera) for ALC adjustment (page 9).
•
There is a DIP switch on the front camera board that allows the selection of: Switch 1 - ALC (OFF) or
ELC (ON); Switch 2 – Internal (Crystal) Synchronization (OFF) or Line Lock (ON); Switch 3 – AGC (ON or
OFF); Switch 4 – BLC (ON or OFF) (page 8-9).
Specifications
(page 15):
Input Voltage: 24 VAC ±20%, isolated.
Camera/Lens Specifications
(page 17):
Image Device: 1/4” ExView™ CCD, 2:1 interlace, NTSC; color.
Resolution: Color: 480 TV lines; Mono: 580 TV lines.
Sensitivity: Day: 0.07 fc (0.8 lux); Night: 0.009 fc (0.1 lux) @40 IRE, f/1.4.
Synchronization: Internal/Line Lock, DIP switch selectable.
Electronic Iris: 1/60 – 1/100,000.
BLC: ON/OFF, DIP switch selectable.
ALC: ON/OFF, DIP switch selectable.
Signal-to-Noise Ratio: >48 dB (AGC off).
Copyright © 2003 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
Vicon part number 8009-5028-01-00 Section 1 Rev 1003
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TELE: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: +44 (0) 1489 566300 WEB: www.vicon-cctv.com