03/10/03
rev. 3/6/2017
WP, MANUAL
Copyright 2017 Vestil Manufacturing Co.
Page
1
of
16
WP
AND
SP-
SERIES
W
ORK
P
LATFORMS
I
NSTRUCTION
M
ANUAL
WP-3737-FD
WP-S
ERIES
SP-S
ERIES
C
APACITY
:
600
LB
(273
KG
)
1,000
LB
(455
KG
)
1,000
LB
(455
KG
)
Table of Contents
Table of Figures
Product Introduction………………………... 2 – 3
Fig. 1 “WP-series Diagram & Parts List”………… ………. 6
Safety Principles……………………............. 4
Fig. 2 “SP-175 series Diagram & Parts List”……………… 6
Safety Guidelines…………………............... 4 – 5
Fig. 3 “Center of Gravity Diagram”………………………… 7
Inspections…………………………………… 5
Fig. 4 “Mast Guard Hinge”……………..…………………… 7
Loading the Platform………………………. 8
Fig. 5A & 5B Tine Lock Operation…….………..…………. 8
Use Instructions……………………………. 9
Fig. 6 “Proper attachment of nylon safety strap
”
……........ 8
Setup/Fold-Down Instructions
Fig. 7 “Caster Insertion”…………………………………….. 12
(WP-3737-FD)……………………………. 10 - 11
Fig. 8 “FTJB & WPJB mounting diagram”………………… 13
Mounting Casters to WP-Series Platforms.. 12
Fig. 9 “Electrical system diagram”…………………………. 13
Emergency Stop Switch Installation………. 13
Fig. 10 “Mounting WPJB”…………………………………… 13
Labeling Diagrams…………………………. 11, 14, 15
Fig. 11 “[WPJB] Fastener order”…………………………… 13
Limited Warranty……………………………. 16
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained
damage during transport.
If damage is discovered, record a complete description of the damage on the bill of
lading
. If the product is undamaged, discard the packaging.
NOTES:
Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is
used
is exclusively the responsibility of the owner/end-user.
Vestil is not responsible for
any
consequential damages sustained as a result of failing to exercise sound judgment while
assembling, installing, using or maintaining this product.
KEEP THIS MANUAL FOR FUTURE REFERENCE OF OPERATORS. CHECK VESTIL.COM FOR UPDATES
TO THE MANUAL. DO NOT USE UNLESS EACH LABEL IS AFFIXED TO THE PLATFORM (AS SHOWN IN
FIG. 12 ON P. 14), UNDAMAGED AND READABLE.
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com
e-mail:
