background image

Table of Contents

 

Rev. 11/30/2018 

LAD-FM, MANUAL 

Table of Contents

 

Copyright 2017 Vestil Manufacturing Co. 

Page 1 of 18 

 

 

 

        

 

 

LAD-FM Mezzanine Ladders 

Instruction Manual

 

 

 

 

Receiving instructions: 

 

After delivery, remove the packaging from the product. Inspect the product closely to determine 

whether it sustained damage during transport. If damage is discovered, record a complete 

description of it on the bill of lading. If the product is undamaged, discard the packaging.

 

 

NOTE:

 

The end-user is solely responsible for confirming that product design, use, and maintenance 

comply with laws, regulations, codes, and mandatory standards applied where the product is used.

 

 

Replacement Parts and Technical Assistance: 

For answers to questions not addressed in these instructions and to order replacement parts, 

labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The 

department can also be contacted online at 

http://www.vestilmfg.com/parts_info.htm

. 

Table of Contents 

Signal words

…………………………………………………………..……………………………………. …. 

2

 

Hazards of using the stair system

……………………………….……………….……..……………........... 

2

 

Specifications

…………….…………………..…………………………………...……………..…………. …. 

3

 

FIG. 1: LAD-FM-60 exploded parts diagram and bill of materials

…………………………………….. …. 

4

 

FIG. 2: LAD-FM-72 exploded parts diagram and bill of materials

…………………………………….. …. 

5

 

FIG. 3: LAD-FM-84 exploded parts diagram and bill of materials

…………………………………….. …. 

6

 

FIG. 4: LAD-FM-96 exploded parts diagram and bill of materials

…………………………………….. …. 

7

 

FIG. 5: LAD-FM-108 exploded parts diagram & bill of materials

……………………………………… …. 

8

 

FIG. 6: LAD-FM-120 exploded parts diagram & bill of materials

……………………………………… …. 

9

 

FIG. 7: Jack Assembly

…………………………………………………………………………………….. …. 

10

 

Installation

……………..……………………………………………………………………………….…...

10-15

 

Storage

………………………………………………………………………………………………...……. …. 

16 

Extending the stair system

……………………………………………………………………………………. 

16 

Putting the stair system into stored position without using the jack

………………………………………. 

16

 

Record of normal condition

……………………………………………………………………………………. 

16

 

Inspections

 …………………..…………………………………………………………………………………. 

17

 

Labeling diagram

…………………………………………………………………………………………… …. 

17

 

Limited warranty

……………………………………………………………………………………………. …. 

18

 

Vestil Manufacturing Corp. 

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 

Telephone: (260) 665-7586  -or-  Toll Free (800) 348-0868 

Fax: (260) 665-1339 

Website: 

www.vestilmfg.com

     e-mail: 

[email protected]

 

 

Summary of Contents for LAD-FM-108



















Reviews: