#65101-10242-G
Bottom Bracket
Medium & Long
Screws for Wood
Clips & Rollers
Bolt
How to install your
Vertical Honeycomb Blind
measuring
tape
drill with
2mm bit
phillips bit or
screwdriver
pencil
knife
Required Tools
Installation
Bracket
How to install your
Vertical Honeycomb Blind
2
Head Rail
4
Fixed Vertical Rail
3
Clips & Rollers
1
Installation Brackets
Installing inside the window frame…
At top of window or door frame, measure 80mm
in from each end and mark with a pencil. This is
the edge of the outer brackets.
Place brackets in position flush with the front
of the window opening and mark where the
screws will go.
We recommend drilling pilot holes for the
screws using a 2mm bit.
Fix the brackets into position using 2 long screws for each bracket.
If more brackets are supplied, space them evenly between the first two brackets.
Installing outside the window frame…
Measure 80mm in from top left and top right of where blind will sit (normally edge of
architrave) and mark with a pencil. This is the edge of the outer brackets.
Position the top of bracket 3mm above the architrave and mark where the screws will go.
We recommend using a spirit level to align brackets if not installing on the architrave.
We recommend drilling pilot holes for the screws using a 2mm bit.
Fix the brackets into position using 2 long screws for each bracket.
If more brackets are supplied, space them evenly between the first two brackets.
Position the top lip of the headrail under
the top front lip of the brackets as per
diagram to the right.
Push the headrail up at the back to click
into position as per diagram to the right.
Note: Do not untie the cords at
the top of the vertical rail.
Attach the floor bracket to the
end cap of unmovable vertical
rail, shown in right drawing.
Push the fixed vertical rail from
down to up as right drawing.
Attach fixed vertical rail by
pushing the fixing hanger into the
gap of head rail as drawing.
Attach clips to rollers (clips are attached to top of fabric).
Wall Plugs for
Brick or Cement
using a 6mm bit
(if requested)
Please write a review on our
website at…
www.venetablinds.com.au
Feedback?
We would love to know how you
went with your installation…
Installation bracket
Head rail
Side view
Need HELP?
Call our
Customer Service team
for assistance
1300 836 382
Included Hardware
The hardware can be found in
the end of every box.
Difficulty:
★★★★☆
1
2
80mm
80mm
Space Evenly
Installation Bracket
Head Rail
End Cap
Fixed
Vertical Rail
Bottom
Bracket
Fabric
Movable
Vertical Rail
Cord
Bead
Clips & Rollers
Support Shaft
