CAMD4 VELLEMAN
1
CAMD4 – Rotating Dummy Camera
1. Introduction
Thank you for buying the CAMD4 ! This very realistic dummy camera will fool almost anyone and is very user-
friendly. Simply plug the AC/DC adapter into a socket and, if necessary, you can add another 20m of cable (total :
40m).
The camera has a built-in flashing LED and rotating platform. The LED will flash as long as the device is powered via
the adapter. You can set a horizontal travel between 22.5 and 350° at 22.5° intervals. The camera rotates 30 sec.
every 3 minutes.
The camera can be used both indoors and outdoors and can protect your shop, home, office, etc.
2. Contents
•
dummy camera
•
rotating motor
•
20m of cable
•
AC/DC adapter (12Vac/400mA) with cable (1.8m) en jack
•
mounting set
Required tools : drill, drill bit (6mm for masonry / 2.5mm for timber), screwdriver, pencil.
3. Connection Diagram
1. camera
2. hinges with fixing screws
3. rotating platform
4. travel stops
5. fixing bolt
6. motor cable
7. AC/DC adapter
8. 20m cable with female plug
4. Use
STEP 1 : Testing
a. Make sure the camera is operational prior to installation.
The two travel stops should be inserted in the available slots. The user can set a travel of 22.5 to 350°, at 22.5°
intervals :
both stops are in slots …
travel
1
45°
2
90°
3
135°
4
180°
5
225°
6
270°
7
315°
remove both stops
350°
Fig. 1
