Version 0.1
23 September 2005
Page 1 of 41
For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater.
© 2002-2005 VegaStream Ltd.
This document describes how to configure the Vega 50 FXS SIP unit using the web browser
interface. The configuration described here will allow the Vega to be rapidly installed and tested.
The instructions below will configure the Vega 50 FXS to operate as follows:
•
Calls made by any of the attached analogue phones will be routed to the SIP proxy; the
Vega will pass on any dialled digits
•
Calls received from the SIP proxy must have a 2-digit “dialled number”, 06 to 13, to
identify which of the 8 telephones to ring. (The translation of the telephone number to the
2-digit dialled number is carried out in the SIP proxy as the Vega registers the 2-digit
dialled numbers against the user access numbers (registered addresses).)
Initial configuration
Vega 50 FXS (SIP)
– R7.0
SIP Proxy
LAN
…
Vega 50 FXS
POTS Telephones
555
01
Unit1
Port1
Vega50
Contact:
06
555
02
Unit1
Port2
Vega50
Contact:
07
555
08
Unit1
Port8
Vega50
Contact:
13
