Quick Setup Guide
For more details – consult your VGo User Guide.
You can view or download it at:
vgocom.com/support
S
TEP
1
Set up the hardware
5 M
I N U T E S
1) Unpack the box and make sure you have:
n
VGo Upper section (part with LCD display)
n
VGo Lower section (part with wheels)
n
Charge Dock
n
Charge Dock AC adapter and power cord
n
Battery
n
Handheld remote control (with AAA
batteries)
2) Hold the
latches
all the way up and gently,
but fi rmly seat the upper section stalks into
the lower section sockets.
3) Flip the latches down.
4) Remove the VGo’s
battery compartment
cover, set the battery inside, with it’s wire
on top, beside the foam block. (Note: if you
have the full size extended-life battery,
remove the foam block).
5) Connect the battery wire, secure with the
velcro strap, and replace the cover.
6) Press and hold the Power button until it
lights up (found on the rear of the VGo,
just behind the battery compartment cover).
Latches
Battery Compartment
(in the back)
Save your VGo Box!
Your VGo is packed with
custom foam. You may need the foam/box for shipping
to another location, or for returning to VGo in the
event that you need to have the VGo serviced.
