ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0101 / T0102
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
T0101 / T0102 --- Page 1 / 2
Mounting Screw (A)
Mounting Screw (B)
Mounting Bracket Screw (D)
Fixture Mounting Screw (G)
Decorative Cover(F)
Mounting Strap (E)
Mounting Screw (C)
Wire Nut (H)
140919
Hardware Package (included):
IMPORTANT:
The fixture features a photocell sensor which enables the light to turn on at dusk and off at dawn automatically.
Note: Fixture can be wall mounted or eave mounted.
Wall Mounted
Eave Mounted
Light fixture should be mounted as shown above when installed (depending upon type of installation)
FRONT
Turn off the power at fuse or circuit box.
1. The mounting bracket is pre-assembled on the light fixture, unscrew the decorative cover, fixture mounting screw and
remove the mounting bracket.
Mounting Strap (E)
Mounting Bracket
Outlet Box
Wire Nut (H)
Back Plate
Mounting Screw (A)
Light Head
Fixture Mounting Screw (G)
Mounting Bracket Screw (D)
Decorative cover (F)
