VARO POWERPLUS POWX07595, Manual

Page: 1 / 11

POWX07595
EN
Copyright © 2020 VARO P a g e | 1 www.varo.com
1 APPLICATION .................................................................................. 3
2 DESCRIPTION (FIG. A) ................................................................... 3
3 PACKAGE CONTENT LIST ............................................................. 3
4 DDITIONAL SAFETY INSTRUCTIONS ........................................... 4
4.1 Guard related warnings .......................................................................................... 4
4.2 Cutting procedures warnings ................................................................................. 4
4.3 Kickback causes and related warnings ................................................................. 4
4.4 Table saw operating procedure warnings ............................................................. 5
5 SAFETY EQUIPMENT ..................................................................... 5
5.1 Cleaving wedge ....................................................................................................... 5
5.2 Saw blade protector ................................................................................................ 5
5.3 Push stick ................................................................................................................ 5
6 UNPACKING AND ASSEMBLY ...................................................... 5
6.1 Assembly (Fig. 1) .................................................................................................... 6
6.2 Attaching the tilt protection (Fig. 2) ....................................................................... 6
6.3 Fitting the parallel fence (Fig. 3)............................................................................. 6
6.4 Mounting mitre angle stop (Fig. 4) ......................................................................... 6
6.5 Mounting the saw blade guard (Fig. 5) .................................................................. 6
6.6 Mounting the extraction hose (Fig. 6) .................................................................... 6
7 OPERATION ..................................................................................... 7
7.1 Check before starting the device! .......................................................................... 7
7.2 Operating elements ................................................................................................. 7
7.2.1 On/off switch ............................................................................................................. 7
7.2.2 Overload Protection (18) ........................................................................................... 7
7.2.3 Setting mechanism for the tilt angle ........................................................................... 7
7.2.4 Hand crank for setting the cutting height ................................................................... 7
7.3 Workpiece stops ..................................................................................................... 7
7.3.1 Mitre angle stop ........................................................................................................ 7
7.3.2 Mitre cuts (Fig. 7) ...................................................................................................... 8
7.3.3 Setting the stop rail of the parallel stop ...................................................................... 8
7.3.4 Parallel stop .............................................................................................................. 8