![background image](http://html1.mh-extra.com/html/vapor-brothers/vb-eleven-pen/vb-eleven-pen_instructions_3451973001.webp)
PLEASE CHARGE FULLY BEFORE FIRST USE
RAPIDLY PRESS THE BUTTON UNTIL IT FLASHES TO UNLOCK THE BATTERY
VB ELEVEN PEN IS FOR EXTRACTS ONLY, NOT DRY LEAF
CAUTION: TEST YOUR ELEVEN PEN FIRST WITHOUT EXTRACTS
VB ELEVEN PEN INSTRUCTIONS
Before First Use:
1 - Fully charge the battery.
2 - Unlock the battery
by rapidly pressing the button.
3 - Test the heater before loading material into it.
1.
Prior to
fi
rst use, fully charge the battery. The batteries
ship
with a partial to full charge, so the charge time will vary and
may
not take long at all. When the red light goes out on the
bottom of
the battery, the charging is done and you can use the pen.
2.
Unlock the battery by repeatedly pressing the button until the
button light
fl
ashes. Once unlocked the button light should glow
when pressed.
3.
Prior to
fi
rst use, test the heater skillet before loading with
anything. If the heater glows red, the skillet is working and ready
to be loaded. If the heater does not glow red, please do not load
anything on it, immediately report the problem.
Everyday Use:
1 - Unlock the battery
2 - Carefully load the heater skillet
3 - Press button
4 - Inhale
5 - Repeat steps 3 & 4 as needed
6 - Lock the battery
Unscrew the cone from the skillet. Load the material directly
onto the heater.
When loading the heater, it is always important to use care as the
coil on any heater is the weak part. Also, be careful not to let the
metal pick tool come into contact with the heater while it is being
energized as this will cause an instant electrical short and
break
the heat
ing wire.
If your material is thick enough, use your
fi
ngers to roll into a bb
sized ball and lightly place it on top of the heater. Never press
or force the material down onto the coil.
You may push the
battery to help the material melt into the coil.
O
verloading the heater
may prevent it from getting hot enough
to vaporize oil.
After the material is loaded onto the heater, screw the cone
back on.
P
ress the button (light should glow) and start to inhale.
We recommend locking the battery when not in use. Lock
the battery by repeatedly pressing the button until the button
light
fl
ashes. Once locked the button light should not glow
when pressed.
E-Juice/Liquids:
To prevent damage to the battery, do not attempt to use e-
juice or liquid with the included skillet heater. Optional
tanks are available to use e-juice or liquid with the VB Eleven
pen.
VAPOR PEN CARE
• Clean the heater
• Clean the threads and contacts
• Always use the provided case
Cleaning the Heater Skillet:
The best way to clean the skillet is to use the heater like a self
cleaning oven. Try to burn o
ff
any remaining residue by tilting the
battery base upside down (usb port up) and pressing the button
until it
fl
ashes. Repeat as needed.
You can also repeatedly dunk the skillet
upside down in a
small pool of iso alcohol (use only 91% or higher).
The outer
finish may wear off if skillet is submerged in strong alcohol.
Let the alcohol evaporate then attach the heater to the
battery and heat the coil to burn o
ff
any remaining iso.
Skillets are consumable and will need to be replaced
periodically
.
Cleaning Threads & Contacts:
Dirty threads or contacts can damage or prevent the pen
from working properly.
To prevent alcohol from running o
ff
into the electronics
when cleaning the battery base,
turn the battery upside
down
(usb port up).
Use iso alcohol (91% or higher recommended) and a cotton
swab to clean the threads on the skillet, battery base,
cone,
plus contacts on the battery base and heater.
Use a circular motion to clean the inside threads and contact
on the battery base.
PROTECT THE PEN FROM DAMAGE
If you
carry
your vapor pen in your
pants
p l e a s e
use
the provided case
or unscrew the battery. Your pen could
break when you sit down, which is not covered by the warranty.